I hope all my Canadian and American readers both had wonderful holidays. Canada’s birthday is July 1st, and America’s is July 4th. Let me tell you, there’s one week a year where most of the continent is celebrating.

I just finished the cloned bra I made for a friend of mine. and it looks so pretty. Prettier than the pictures show. And she LOVED it. She exclaimed when she saw it that it was prettier than the original. Well, that made me feel good!

She chose Ivory & Pink for her colors. And they really do look so nice together. All supplies came from Bra Makers Supply. Here’s a close up of the set we bought at Bra Makers Supply.

And the back of  her bra.

It all went together quite smoothly. Cloning is easier than pattern adjusting!

There were a few things I noticed on this bra that were a bit different than I was expecting. One was on the original bra, the manufacturer only used 1/2″ band elastic – if it was that wide. I was really surprised when I saw it and how narrow it looked. I didn’t measure it, but honestly, it looked like the same as the upper band elastic. I changed that to 5/8th width which is more supportive and should be more comfortable.

Changing the size of the elastic meant I had to add that extra bit to the pattern I traced. That wasn’t a problem, but there was not room for all that elastic under the cups. So, with bated breath, I followed the advice Beverly gave in a recent blog. She explains how to cut the elastic so it will fit under the wire.

I read her blog and thought, ‘that makes sense’, but then when it came time to actually cut the elastic! Oh, my! What a terrifying feeling. I had just spent hours sewing this bra… and it’s for someone else… and she paid for all the materials… and I’m about to cut it! Can you feel the drama there? Well, I can tell you I’m so very thankful it all turned out.

But I didn’t just cut the elastic. That was too big a step for me, so I took a preparation step first. To help me feel more comfortable cutting, I folded the elastic over the seam where the cups were sewn into the cradle – that same seam the channeling will be sewn onto – and then traced on the elastic where I could feel the seam underneath the elastic. Sorry, no pictures of that. I was busy holding my breath that it would all work out! Then I simply cut along that traced line. It all worked perfectly. When I do this again, I’ll take pictures to show you.

On this slightly blurry picture (Sorry, technical difficulties), you can see the elastic is much wider at the lower bridge than what can possibly fit under the channeling. Trimming the elastic is a great option.

As well, on the above picture you can (barely) see the seam in the bridge. That was another one of the surprises I found on the original bra. Most patterns I’ve come across have the bridge cut on the fold. This original bra had a seam in the bridge. So I added a seam allowance to the bridge, and seamed both the duoplex on the front of the bra and the sheer cup lining.

Again, not super clear, is the lower cup of this bra is lined and there is a vertical seam in the lining. It shows up much better in this photo of the original bra.

That seam line that is visible is actually in the lining, not in the lower cup. So I copied that as well.

The only finishing touch I’d still like to add are a couple of bows to cover the strap seams. They always make it look so much prettier.

One last surprise on this original bra was the lower cup fabric is stretchy! That one doesn’t even make sense. When dealing with cups larger than a C why would a manufacturer use stretchy fabric? It’s not supportive. So one negative is my friend said she could use a little more room in the lower cup. It fits and she’s still thrilled with it, but we’re thinking of changing things up for her next bra. I’m thinking the Shelley bra will be perfect for her.

And lastly, my friend, Jan, really loved her apron. She wanted a picture of her wearing it for the blog. Not only her wearing the apron, but she grabbed a spatula from the kitchen to make it look like she was busy cooking too.

Happy creating!