Sleep Masks

I love to wear a sleep mask at night. I don’t want to see the light from the phone, or the alarm clock, or the smoke detector.

We were on holidays when I first realized how great a sleep mask was. The smoke detector was right over the bed and shining its evil green light in my eyes all night long. I went shopping the next day.

The one I’ve been wearing, well, it was old and falling apart. It was long past time for a new one. I looked around the web and found this pattern.

full_901_84191_AdultSleepEyeMask_3

This pattern (and the image) are both from PetitBebeCreatioNZ on Craftsy. The photo has a link in it, so you can just click on that and it will take you right to the pattern.

It’s a great pattern with wonderful instructions.

new vs old

What’s left of my old purchased one is shown at the top of the photo. It was literally falling apart – that’s just the inner piece. There was also the back and front that fell off it. Below it is the sleep mask I made using the free pattern. These are pretty much the same size.

However, it’s summer here and the sun is up early and down late. I don’t want any light at all. It was time to supersize my sleep mask. I found another free pattern on So Sew Easy. I found the instructions so thorough from the first pattern that I used them again and didn’t even glance at the other instructions, just the pattern.

Here you can see the new oversized one compared to the old fallen apart one. It’s definitely bigger.

Old vs Newest

Yes! Now we’re talking block out all the light.

For comparison’s sake, here are both of my new ones.

Newest vs new

That is seriously oversized! But I’m happy with it.

Another definite bonus of making my own sleep mask is I can measure how much elastic I need to fit me. The store-bought mask had Velcro to fasten it – and that Velcro caught in my hair all the time until I replaced it. This is good right from the start.

Happy creating!

Baubles & Backgrounds

Do you see my new blog format? I’ve been doing a little work on it in the past week. I’ll share more on that later in the post.

This week I was playing with beads again. It was time for a new Medical ID bracelet for me, and for a friend.

oldMy friend had purchased this bracelet, but as you can see, after wearing it for well over a year, she needed a new one. The coating on the Swarovski pearls had worn off. Now, she wears her bracelet all the time – in the shower, swimming – she doesn’t take it off.

I’ve used Swarovski crystals and pearls in the past and they haven’t done this, but I haven’t put them through all that hard wearing either. I take my bracelet off daily.

The new bracelet I made her is in the above photo as well, but here’s a better photo:

new over oldThe new bracelet is over the old one. It looks much better. Classic design and lines. It’s lovely. I just might need one too.

While I had all my jewelry-making supplies out, I decided to make myself a bracelet. I love turquoise in the summer but didn’t have a Medical ID bracelet in turquoise. I do now.

bracelet

The center three stone beads aren’t turquoise, but are the same stones I’d used in some earrings – dyed Imperial Jasper. The bracelet also has some lovely Sterling silver spacer and feature beads. I’ve been happily wearing it all week. My earrings, below, show you my matchy matchy. I made these last year.

blue earrings

Other than playing with beads, I mentioned I’ve been playing with my blog format. Do you like it? I love it too. It looks so clean and crisp.

Sadly it took more time than I would have liked. I’m not the most technical person, but I’m learning! Just to give you an example I took a full day to redirect the traffic from my old blog site to my new one. After spending time researching, trying something, it not working, more research and more tries… well, I found out I couldn’t do it myself. WordPress had to do that. It was so easy after I pushed a button and paid them a very small and very worthwhile fee! Done.

After redirecting, I spent some time taking photos for my background. I’d found a lovely lace background that I would have had to pay a terrible price to use – way more than real lace cost! Hmm, time to get some lace out.

Here are a few of my attempts before I found just what I wanted:

sparkle ivory over gold

This is a lovely lace, but I wanted more in my background than just lace. The lace background was my original inspiration, but now I wanted more of me in it.

horizontal black white and gold over goldThis is my kind of lace. This is so beautiful, but I found the black a bit distracting as a background when I was trying to read the text. As much as I loved it, I thought a little less just might be better for a background.

photocopyThis one was a lot closer to what I wanted and what I felt represented me. But It wasn’t quite perfect for me yet. For my final background, you can see I kept my pearls and added my thimble. Perfect!

Happy creating!

Did You Know This About Your Presser Foot? About Thread?

In this post I have a few tips for you.

I recently had some fun working in a sewing machine store. I felt like I’d found a dream job, but sadly an old injury made its presence known again and I couldn’t continue to work there.

While I was there I was learning so much though. Imagine a  job where you have to learn all the different sewing machines, what they do, and then practice. I told everyone I’d gotten a job in a toy store. The only thing that could possibly have been better would be to work somewhere like Bra-Makers Supply. Well, that or a jewelry store.

One of the first things I learned was about my own sewing machine. I’d even taken lessons for my new machine when I bought it and didn’t learn this:

Did you see my presser foot? One of my complaints with this sewing machine had been there’s just was not enough room under that presser foot. Well, no problem now that I’ve learned if I just continue to lift it up a bit more than it goes up on its own there’s lots of room. It won’t stay there on its own, but I’m very happy with this newly found information and have put it to use already.

Here’s something else I learned that is so interesting, and affects all of us who sew – thread can be wound onto the spools upside down! Did you know thread had a right way of unwinding and a wrong way? Me either.

So, what difference does that make? Take a look:

If you look at the beginning of the video, you’ll see I’m taking the thread off the spool with the name at the top, which we’d normally consider to be the top of the spool. As soon as I pull the thread out from the spool, it soon starts to twist. According to how the thread has been wound on the spool, the top of that spool is really the bottom. We need to test our threads (each spool we buy) before sewing so they won’t twist on us in our machines. Really, who knew?

It was suggested to me when I buy thread, bring it home and test it before sewing. Then once I know which way the thread won’t twist, take a marker and put a dot on the ‘real’ top of thread so as to know how to load it. Thread twisting in our machines is not something we want. That’s a great tip!

One last tip, but this one isn’t a video. This is from my recent Ivory Bomb.

In the past I always worked from the front when attaching my strap elastic. I just made sense to me.

strap frontHowever, on my ivory bomb, I decided to pin the elastic to the band from the inside.

strap elasticI loved how the power net was meeting the edge of the elastic. In the past, I would notice they didn’t always meet perfectly the way I wanted when I pinned from the front. Sometimes the pins would push the power net rather than go through it. I’ll be pinning my strap elastic this way from now on.

Happy creating!

The Perfect T-Shirt

Last year I saw a Sewing With Nancy episode – Sew the Perfect T-Shirt. I was so glad I PVRed that episode. I have been wanting to make a T-shirt, and who doesn’t want the perfect one?

You can watch the episodes here: Part One and Part Two.

After watching the episode, I immediately went over to Pamela’s Patterns and ordered her Perfect T-Shirt pattern.

Perfect Tee

The pattern has been sitting patiently on my desk with so many other projects for a few months now, but it was time. I bought a whole whack of cotton/Lycra to make Tees for summer. It was time.

I love the approach Pamela takes on the show. You determine your size, and then start with that sized Tee, any alterations are done to that first Tee and the pattern at the same time. I think that’s a great idea! That way you get a corrected pattern and a correctly fitting Tee with one alteration.

There was one glitch. I started reading the instructions (see, I learned from the last project) and then went to our local fabric store to find Stay Tape. Well, it seems no one in Canada seems to know anything about Stay Tape. The stores don’t carry it. So instead of getting on with my sewing, I was trying to figure out a replacement for Stay Tape. We also had a looming mail strike, so there was no way I was going to order anything and possibly wait three months to get it.

I used woven and knit interfacing in place of the Stay Tape. I found a great blog post on Pattern Fantastique describing  how to make your own Stay Tape and decided I’d try it.

Here’s the interfacing on the shoulders. I used woven interfacing as Pamela said to use the woven stay tape here.

Interfacing

For the neckline I used a knit interfacing. Both were fine. (Sorry for the blurry pic.)

Interfacing on neckline and sleeve

Here’s my Tee:

Front of Tee

I adjusted this pattern to make a size Small top, with shortened armholes, lowered the bust dart, and graded up a size for my hips. The grading up gives this tee a peplum look, which I wasn’t wanting. The hips are a bit loose, so I may try a size Small for my next tee.

And from the side:

Side of Tee

I love how the darts on this disappear. You can’t see them at all. That was a small concern I had before making the pattern. I didn’t want to draw attention to my bust by adding a dart to give enough room for the bust. It might be different on a solid colored fabric, but on this it’s great!

And the back:

Back of Tee

It all came together very well, and I will definitely be making more.

I really like this pattern. Pamela has a second pattern that goes with this one that’s all necklines. I know what I’m ordering soon. I love the darted bust, which saved me from making a Full Bust Adjustment.

I do have a couple of changes to make still. I think I’d like longer sleeves for my tees, and the neckline is a tad loose. I need to adjust the inner shoulders to bring that up.

Here I am on a really feel-good day in a total Me-made wardrobe:  top, bottom, and undergarments. And I’m in the mountains (trying very hard not to squint). My hubby says take off your sunglasses. No sunglasses = squinting.

Me in mountains

Happy creating!