A Review of Craftsy’s Coverstitch: Basics & Beyond

It’s time for another Craftsy class review.

This review is for Coverstitch: Basics & Beyond with Gail Yellen.

I’m on my own for reviews at the moment, as Marsha and Naomi have other pressing engagements.

Reviews

This is a fairly new class, so it doesn’t have the amount of reviews as some of the other classes I’ve reviewed. At the time of this writing, there were only 35 reviews, and a few of them were less than favorable.

A few reviewers expressed a desire to have had more information that fit the ‘Beyond’ category.

If you notice the Instructor rating, Gail gets her highest rating there, and I agree! I had a couple of questions and Gail answered really quickly – I’m talking the same day – and her answers were very helpful. Gail deserves that high rating.

 Outline

First Thoughts on the Class

I was really happy this class came out. I’ve been purchasing a Janome Cover Pro 1000CP from a friend. It had been staying at my house, and I decided I wanted it. Thankfully, my friend is being very patient in my paying it off.

Seeing as this was a brand new machine to me, I knew nothing about how to work a Coverstitch machine and wanted a class that started with the basics. This class did that.

In the class, Gail shows both the designated Coverstitch machine, and the Serger/Coverstitch combination machine. She goes through how to change the needles on both machines, and how to set the needles for different stitch widths. For a complete beginner, that is great!

Gail also gives us ideas on how to use these different stitches and demonstrates them on a few projects.

In the above collage, all taken from screen shots from the class, Gail shows how to make a tassel, sew a flat fell seam, and install a zipper – all with the Coverstitch machine. I would never have thought of using this machine for any of those. Honestly, I really thought it was just for hemming. So, this was all much more ‘Beyond’ than I was expecting.

Gail also shows how to hem an unbound neckline.

This is a lovely neckline. Hmm, this is a pretty idea to try on my next tee. I know I’ve wanted to hem a few things using the Coverstitch machine. I hadn’t even thought of necklines.

Disappointments?

There were a number of reviewers who expressed they wanted more and there wasn’t enough beyond the very basics. So was I disappointed? Well, no. Looking at the class, I can’t say I am. The class does cover a lot. More than I thought or expected.

There was only thing I wanted to see and didn’t – the foot shown below. My machine doesn’t have a regular presser foot (I have one on order), but it has a Center Guide foot, much like a Stitch-in-the-Ditch foot. I did realize I can take that center guide off, and I have a see-through foot. So, I’m happier with this foot now.

Feet

Let’s go over the machine feet Gail does cover in the class: the regular pressing foot, a curved pressing foot, a see-through pressing foot, and a narrow chain stitch foot. She also covers a belt loop binder, and a down turn feller, and seam guides. She even gives an idea for how to make a seam guide using a Post-it note pad.

I thought this was a neat idea, and tried it twice. The first time the pad moved, and I was also sewing a curved hem. That whole thing didn’t work out. The second time, I really pushed on the pad to make sure it was good and stuck down. I had no problems at all. It’s a great little trick if you don’t have a seam guide. (I want one of those too!)

Recommendations

 I do recommend this class. It’s a great class, with a lot of very good basic information in it, and some not-so-basic information too. This class made the difference in me bringing out my CoverPro machine and using it rather than letting it sit like it had been.

What I Made

Well just before I go there let me tell you one really great thing about Coverstitch machines: I learned if you make a mistake, you can very easily rip out the stitches – from the last stitch back to the first. I needed to use that tip. It took me a minute or two to find the right thread to pull, but once I found it – those stitches came out so smoothly and easily! What a nice feature.

So what did I make? I made a very sloppy looking hem! I don’t think a curved uneven hem is the first thing I want to try sewing and showing from my machine. I pulled those stitches out.

I also planned to hem a gorgeous Maxi skirt I wore once and then the hem started coming out. It’s been sitting in a mending pile for the better part of a year waiting for me to learn to use this machine. I got it out and… it’s a blind hem on it! (Rolls eyes!)

I did shorten my favorite pants. I’ve been wearing them too long for over a year, but every time I put them in a mending pile, well, they just couldn’t stay there – they’re my favorite. This time, I did hem them using Gail’s Post-it Note pad idea!

If you have a Coverstitch machine, and haven’t used it, I do recommend Gail’s class to give you a great base to learn how to use your machine.

See below for a coupon for this class.

Happy creating!

P.S. You might want to look at Another Perfect T-Shirt.

Print Friendly, PDF & Email

6 thoughts on “A Review of Craftsy’s Coverstitch: Basics & Beyond

  1. Just so you know, the price came up as $24.99 for me for this class. Is there a coupon code to use to bring the price down to $14.99?

    1. Hi Carol,

      Craftsy is doing things a little differently now, and it’s a little more confusing than it was. Now the codes are applied to our shopping cart, and it won’t show up until we go to the cart. I’ll add that to my posts going forward.

  2. A follow up to my earlier comment. After I put the class in my cart, the price did change to $14.99!

    1. I’m glad the price worked out for you, Carol. Let me know what you think of the class. For me, it made the difference between the machine sitting there and me using it.

  3. Great review! I don’t have a coverstitch, and one of the main reasons I don’t is because I wouldn’t even know where to begin, so it’s good to know this will help a complete beginner!

    1. Thanks, Reece. I know exactly where you’re coming from on this. I didn’t even try the machine that was sitting at my house because I didn’t know where to start.

Comments are closed.