Will It Ever Stop Snowing? And Other Greats!

I saw a cute video by Rick Mercer, a Canadian comedian, which depicts how I feel so well:

Yes, that is the sad state many Canadians are in right now. We’re just hoping for warmer weather, and … well, it’s snowing right now. Sigh. So much for the calendar saying Spring.

I’ll happily stay indoors today and work on my pattern, right? Sigh, the pattern. Okay, I’m going to focus on the positives and deal with the challenges next.

I got the short wires from Bra Makers Supply. I’m was hoping for the same length on the side, and shorter at the front to accommodate the lower bridge. Great! But nope, those didn’t work the way I wanted them to – too short on the side. I think I still want the Vertical wires, I’ll follow Amy’s suggestions on her blog (Cloth Habit) for shortening them.

With newly shortened Vertical wires in hand, I got out my Bra Makers Manual and drew a new bridge & cradle for these new wires. Another great! But, I’m not done with this topic yet. More to follow…

Then I decided to make sure my custom bridge really was the best fit I could get. An article from Threads that talks about making a Duct Tape Sloper was my inspiration. I decided to follow the same principle and use multiple layers of tape to make a ‘sloper’ for my bridge. That worked well too. And then I checked it against the custom bridge I’d made. It is almost exactly the same as what I’d done when I followed the instructions in Norma’s book, Demystifying Bra Fitting and Construction. So I have my correct bridge shape. Great!

full bridge

Here’s my little tape sloper. I didn’t continue the sloper past the marker – that wasn’t the problem area, so I focused on the middle of the bridge. The rest of the wire was fitting fine. But that area…

Well, a picture is worth a thousand words, so here is the difference between my little tape sloper and the newly drafted cradle pattern. Yes, there is a problem.

cradle issue

Do you see that area at the front of the cradle where the bridge is? It’s nice and round. I don’t match. So, what to do about that?

I have asked that question before, and didn’t get an answer that was satisfactory. I was told by one person there was nothing to be done about that. But that’s an important very supportive area, and it does need to fit. So, I re-drew the cradle with the custom bridge in place of the bridge here.

Back to those shortened wires. Oh my! I will tell you, shortening them is not a problem. However, covering that rough edge is! I read Amy post, and decided to follow her suggestions for using Plasti-Dip. There was no variety of colors, in fact I had my choice of red or black. That was it.

So with red Plasti-Dip in hand, I came home and dipped my newly cut and filed wires. I let them dry overnight even. They looked great! And then came that magical moment when I went to insert them into the bra channel. I should have taken a picture… I inserted the newly rubberized end of the wire into the channel and pushed, and pushed and pushed. Then I did what I’m sure 99% of married women do when they can’t do something physically — I called my husband. ‘Honey can you help me?’ He pushed and pushed. And then looked at me and said that’s not going anywhere.

It seems Plasti-Dip is a rubber coating. Rubbery is not what I was expecting. I’ve been to every hardware store in 3 towns and no one has anything other than the rubber coating-type Plasti-Dip. Well, that didn’t work.

I have read about others using Goop, but I don’t think that is a preferred method. I bought some heat-shrink tubing and will try that. I’ve said this before, and it’s still true… I’m close.

Happy Creating!