Movie Inspiration and The Bra-A-Week Challenge

August 16, 2015December 27, 2017 ~ Michelle ~ 4 Comments

Where do you get your inspiration? I get mine pretty much anywhere I see something pretty. I remember going through a mall with a friend, and I stopped to take photos of lingerie. My friend was so surprised. I asked her why she was surprised, and she said she just thought I’d make plain things. I remember thinking why would I make something plain if I could make something pretty?

Inspiration struck one night when I was watching The Devil Wears Prada. Have you seen the opening scene? There’s lacy lingerie coming out of dresser drawers; I paused the movie to grab my phone and take pictures. They were all so pretty.

This one inspired me the most.

There’s an overly large generously-covered crystal bow on the front of this bra that doesn’t thrill me so much, but the rest of the bra? It’s lovely. That organza trim against basic black? Love.

This bra was my inspiration for this week. To complete my camisole and panty set, I used a little more of the mesh to make my own trim and made a not-so-basic black bra.

front-2

I’m using the Pin-Up Girls Classic pattern, with the lower cup split and all my modifications added to make it fit me.

The bridge has some more of the leopard mesh – I couldn’t just leave it black. There’s also a pretty crystal and bow on the bridge.

bridge-bow-and-crystal

Lastly, I’m still deciding if I’ll add bows to cover the strap seam or not. I’m leaning towards bows. I didn’t want anything to distract from the mesh trim, but I don’t think the bows do. Below you can see one strap unbowed, and one strap with a pinned bow.

unbowed

I was really wondering as the week went on if I’d get this bra done. I’ve hurt my hand somehow and everything hurt. Putting pins in hurt. Taking pins out hurt. Holding the fabric hurt. Seriously. I’ll warn you now, next week will be a light sewing week for me while I let my hand heal up a bit.

Some good news though, is there is enough mesh left after this bra to make one more thing – another pair of my TNT panties. I’m thrilled with my set and although I can’t say I’m looking forward to cooler weather, I am looking forward to wearing my whole set come fall.

Now onto the Bra-A-Week Challenge. This week we’re on week 31.

First off, let me say, we did have a submission last week. But technology got in the way. David sent his submission in time for the challenge, but it took over a day for it to get to me! It was in my in-box on Sunday night.

So, here’s David’s lovely submission from last week:

Aabracup

This is stunning and so very delicate. I love how the elastic is threaded through the lace on the inner cup. David is a free-lance lingerie designer.

Our next submission comes from Emma. Emma made a Longline Watson Bra.

long-line-watson

Emma says, this is her first Watson, her first actual bra. Emma also made a pair of high-waisted knickers. You can read more about her beautiful set on her blog, A Hand-Stitched Life.

watson-set

What a gorgeous set. Well done, Emma!

Our next submission comes from Amber. Amber made a nursing bra. Amber used the Pin-Up Girls pattern for this and added a few alterations – a split lower cup, a nursing sling, and nursing clips. Pattern, fabrics, (duoplex & power net) and findings for Amber’s bra came from Bra-Makers Supply and BWear.

nursing-bra

Amber used power net for the nursing sling, and says it has worked very well; she also used power net with lace on the upper cups – which worked well for nursing as size needs can change throughout the day.

nb-open

What a great idea, Amber! It’s so pretty and really functional.

Our next submission comes from Lois. Lois knew as soon as she saw this fabric, it would be perfect for the scalloped border on the bottom of a corset.

Red-Corset-15-8-12-(06)-fro

This border-embroidered organza is from Fabricland. The pattern is Vogue 8393 – an oldie from 2007. Lois used the plain Organza as the lining for the cups and then partially lined the back and side front. She also moved the separating zipper to the side, and used red bias tape for the boning casing.

Red-Corset-15-8-12-(09)-bac

How very beautiful, Lois!

Such beautiful submissions this week! Thanks everyone! And Happy creating!

TNT Wins Again and So Sew Easy

August 9, 2015December 27, 2017 ~ Michelle ~ 2 Comments

I was really thinking I’d try another pattern for some panties, but when push came to shove, I just didn’t love all aspects of Butterick 6031.

butterick-6031

What I like about them is they sit at the hip. I prefer a Hipster over a Brief. What I don’t love about them is they also look rather like Boy Shorts. As cute as they are, I decided I’d go back to my TNT favorite panty – Kwik Sew 2286.

tnt

I played with my pattern using the same technique I’d mentioned a few weeks ago – redrawing the front and making a new pattern. Here are my panties to go with my camisole. I used the same leopard mesh as in the camisole (thank you again, Ginny), and the same lace (Frog Feathers), but this time I’ve matched them both up with some Cotton Spandex from Bra-Makers Supply.

To bring even more continuity to the two, I used the lace in-between the mesh and cotton pieces on the front, and cut away the material behind it to give it the same peeking-through lace look. I think it pulls them together very nicely.

Cami-panty-set

For a second pair of panties I used the mesh again, but decided to venture out and try a new pattern. It was with a little hesitation though. I should have listened to that little voice. I made the Sophia panties from Ohhh Lulu.

Here’s the photo from their Etsy store:

il_570xN.686001453_rp58

Aren’t they cute? That’s not what mine look like, she says in a flat voice.

sophia-set

So what is wrong with mine? Well, they’re just too big. And I’ve already taken them in a 1/2″ on each side side, and in taking them in I lost most of the ruching on the sides. On their web site, when they released the pattern, they said to test it first before cutting into your good material. Yes, that’s good advice. Back to them being too big… You can see when I put my TNT pair over top of the Sophia panties. They’re not too bad at the waist, but the leg opening. Well, that won’t work for me.

sophia-and-tnt

Looking at them, I really didn’t think taking them in more would help how much too big they would be at the leg opening. Normally, the Sophia panty is finished by turning those side panels inside out and sewing them with a straight stitch. I decided not to do that, but to add some elastic there and see if that helped.

leg-fix

It did help a bit, but they’re still to big. I’m really not one to give up. I knew. A bow. A bow makes everything better.

bow

They look a lot prettier now. One thing I didn’t do that I often do when buying patterns is look for the ones lots of people have made and loved. I didn’t do that with this pattern. It was just too darn cute. Sigh. I’ve seen oodles of Grace panties, so maybe those were the ones to try.

Next week I will be adding one more piece I want to make to complete my Camisole set.

Normally, at this point in my blog I’d be saying, ‘And now onto the Bra-A-Week Challenge. This week we’re on week 30!’

Well, we are on week 30, but I think with all the amazing sewing last week, everyone went camping this week. Let’s hope we have lots of submissions again next week!

To end this week, I have some good news – I was asked to write about bra and lingerie making on So Sew Easy. My first post was published this week to coincide with National Underwear Day . You can read it here. As well, I’d love to hear your thoughts on it, and what you’d like to read about in the future.

Happy creating!

Butterick 6031 and The Bra-A-Week Challenge

August 2, 2015December 27, 2017 ~ Michelle ~ 12 Comments

Have you seen any of the Patterns by Gertie? She has some lovely patterns, and her Butterick 6031 is one of my favorites in my lingerie pattern stash… and it was time to pull it out.

butterick-6031-w

It is so pretty! I love that slip – black and white – such a classic!

Another admission I must make is I love watching The Shopping Channel. There are many Today’s Showstopper items in my house. This camisole was something I found on their website and was an inspiration for me. This, as well as some gorgeous material a friend sent me. The photo is the Rhonda Shear Leopard Lace Cami.

comparison-w

I saw this and loved it, but I wanted something a little looser. I have a favorite camisole, and it’s not a snug fit, so I wanted one more like the one I have. That leopard lace? Love! Yes, it was time to pull out the leopard mesh I have in my stash and make something with it. Adding lace just makes it perfect.

Here’s my B6031 camisole.

Cami

Love, love, love. However, I did have a bump along the way. I’m still trying to figure out what happened. Somehow, after cutting the mesh material for the cups, I ended up with two right cups. Excuse me? I’m completely baffled by this. I really have no idea how I cut out two the same, but I did.

right-cups

That was upsetting. I didn’t want to waste any of the material. I will be able to use the material to make a Shelley though, so I’ll save it for future right and left cup pieces. I wasn’t alone this week though, I was reading on another blog how the blogger cut out two left sides of her top.

To make the camisole I also had to do a Full Bust Adjustment. I’ve done one before when I made my moulage from Suzy Furer‘s class on Craftsy: Patternmaking Basics: The Bodice Sloper.

However, this time I used the information on the sew-along from Gertie herself to adjust my pattern following her instructions. I’m glad I did. The instructions I have would have had me add 3/4″ more than I added. The 1″ Gertie suggested was perfect.

I decided I’d follow along on the sew-along, and the funny thing about following along is once I got started sewing, I forgot about following. I was 3/4s done and remembered. I went back and read through it just to see what it said. The sew-along is for a slip, but all but the hem treatment is exactly the same as for the camisole. I’m thinking of trying the panties from this pattern too. They look really cute and are similar to my favorite TNT Kwik Sew 2286.

I also had some fun making my own bows again. I often like to find some way to do something different or unique. I did that with my bows. The first bow shown here has some mesh with the ribbon, and they’re both tied into the bow, the second bow is ribbon tied with the mess, and the mesh tails hanging down. Both were so fun to make.

Front-bow

Strap-Bow

The materials I used came from BMS (power net), Frog Feathers (lace), and a dear friend, who just happens to be in our Challenge this week, (leopard mesh). Thank you, Ginny! I love how beautiful my camisole is, and will treasure it even more because the material was a gift.

Now onto the Bra-A-Week Challenge. This week we’re on week 29 and we have a great week!

Our first submission comes from Karin of Mrs. Weaver’s Finest Unmentionables.

untitled

This is the Marrakech bikini. It’s based on the Rebecca bikini from the 3 Sisters pattern, a Pin-Up Girls pattern. Karin altered it to make the cups a little more flattering. The back detail is gorgeous and the fabric amazing!

untitled (2)

That is gorgeous! You can read more about this beautiful bikini on Mrs. Weaver’s blog.

Our next submission comes from Amber. Amber made this beautiful bra for her friend, Helena. She started a while ago, but got interrupted in her sewing by having a son. Congratulations on your son, Amber!

untitled-(3)

Amber started out planning to make a basic bra, but then saw this lace and wanted to try a couple of different techniques.

untitled-(5)

Look at that starburst. So very pretty! This is the Pin-Up Girls Amanda foam cup pattern. The pattern, fabric and notions – except for the lace are from Bra Makers Supply or BWear. It’s beautiful, Amber!

Next we have a beautiful bra from Maddy.

Maddy made her third Marlborough with matching Ohhh Lulu tap pants, in coral lace.

Maddy says, ‘I love this set so much! The fit is lovely and comfortable, and I’m so in love with the lace (and its remnant price tag!)’

I agree with Maddy on that – it’s lovely! And beautiful remnant always feels better than full price. It’s gorgeous! You can read more about Maddy’s Marlborough on her blog, Miss Maddy Sews.

Next we have a beautiful bra by Sofia.

Sofia made a very lacy bra. Is there anything more delicate looking than an all lace bra? She also made a few alterations to her pattern. You can read about that on her blog, Silver Lining.

Lacy-bra

Beautiful. That bow really looks awesome, Sofia! Sofia made her own bow for this bra. It really pops with that deep color.

Our next submission comes from Ginny. Ginny made the Boylston Bra, the newest pattern from Orange Lingerie, and she made it for her niece.

bcu

Oh, that is pretty. Ginny describes the Boylston as ‘a sleek balconette style with self fabric straps’.

Ginny also made some matching panties for her niece. Here is Ginny’s first set featuring Make Bra’s DL21 panties.

bs2

That is lovely. Ginny, your niece will love it! Here’s Ginny’s second set now featuring Ohhh Lulu’s ‘super comfy’ Grace panty.

bs3

I love that floral lace on the sides! You can read Ginny’s guest post on Sewcialists‘ blog.

Our final submission for the week is from David.

David front

David made this bra with pink cups with black lace. The upper part of bra cups are made with black embroidery on tulle.

David side

This bra has a double strapy back and a neck strap.

David back

David is a free-lance lingerie designer. This is really beautiful.

Happy creating!

Pretty in Pinks Panties and The Bra-A-Week Challenge

July 26, 2015December 27, 2017 ~ Michelle ~ 4 Comments

A pretty new bra deserves some matching panties. I went back to my TNT panty pattern, Kwik Sew 2286, and made a few modifications to the original pattern to make my panties.

Making these panties with the horizontal lace is really easy. Here’s what I do.

1. Re-draw the front pattern piece because you’re going to cut it up.

2. Lay your lace over the new front pattern piece. My pink lace was packed away, so I used the lace I had out for this photo. Your laces may be different heights, 5″ or 6″ or less even.

3. Because they can be different heights, do this step for each lace you use. Draw a line where the lace ends. Cut your lace the width of the front pattern.

4. Re-draw the lower front piece now – adding 1/4″ seam allowance.

Here it is. This is now your new front pattern.

I fold the lace to find the center front, and fold the bottom front material as well. Mark them both with a pin and match them up overlapping by that 1/4″. You can see at the top of my pattern in the photo above, I use a Zigzag stitch to attach them together. It’s not hard at all to hack your favorite panties and made new styles and still get your favorite fit.

I put these new pattern pieces in a new envelope just for themselves, so I can pull them out and re-use them when I want to make that style again, being careful to make sure the lace is the same height.

One last bit from me before we move onto the Bra-A-Week Challenge. Remember my bridge from last week, and how I felt it needed some bling?

I added a few crystals with my Hotfix tool. They may not cover up that little pucker, but they do make the bridge look much prettier. I didn’t stop there though.

I added a crystal to each strap. Can there ever be too much bling or lace?

Now onto the challenge. We’re on week 28 of the Bra-A-Week Challenge.

Our first submission comes from Andie.

Andie made a beautiful bra she’s called her Sailor Mercury bra.

Isn’t that lovely? It’s made from teal duoplex, white findings kit, white power net, and white power mesh lining the lace from Bra-Maker’s Supply. The white lace is re-purposed from a nightgown Andie had used for a cosplay project last year.

I love re-purposing things. It’s so creative and it’s also so very pretty.

Andie also embroidered Sailor Mercury’s symbol on the right back strap to really make it her Sailor Mercury bra.

I love that! I hadn’t thought of using embroidery stitches on my bra to make it even more unique. What a great idea, Andie!

You can read more about Andie Sailor Mercury bra on her blog: Sew Pretty In Pink.

Our next submission comes from Erin.

This is a full band bra, full coverage with extra long wires. It has horizontal seaming, with a split lower cup. Erin made it using a lightweight stable knit, power net for the back band and 15 denier to line the bridge for stability.

Erin, that looks like such a fabulous fit and it looks so soft and comfortable.

I love the bow. You can read more about Erin’s bra on her blog: The Sewing and Life Adventures of Emerald Erin.

Our next submission is from David. Here David made a foam cup bra.

Wow. That is really beautiful. It definitely has the Va-Va-Voom factor.

It’s so beautiful. David is a freelance lingerie designer.

What wonderful submissions this week! If you haven’t looked at the Pinterest board for the Bra-A-Week Challenge, you can see many of the past weeks’ submissions all at once and get lots of inspiration.

Happy creating!