Club Tissus

Canada Cups – It’s a Wrap

~ Michelle ~ 24 Comments

Welcome back for the final stop on our Canada Cups Coming Unwired tour.

I’d Like to Thank the Academy…

Before I say anything else, I really want to say a big thank you! We put out the call to some incredibly talented Canadian designers, suppliers, and bloggers, and got an amazing response! Well, you’ve seen the prize list, seen the makes, and read the blogs. It’s been great!

Personally, on behalf of the bloggers, here’s a shout out to Bra-Makers Supply, Chelsea C. Designs, Club Tissus,  Favorite Things, Jalie Sewing Patterns, Lingerie Secrets, and Ohhh Lulu for donating patterns and/or supplies to our bloggers!

We had two guest bloggers on the tour as well! Some wonderful professional bra-makers took time out of their very busy schedules and wrote up posts. Thank you, Linda (Uplift Custom Bras), Maria and Karin (Mrs. Weaver’s Finest Unmentionables). We are so grateful to you.

Our tour really wouldn’t have happened if it weren’t for our bloggers willing to take their time too. Thank you Deb, Jessica, Lisa, Marsha, Mel, Michelle S., Rachelle, and Valérie! I loved seeing your gorgeous makes!

Lastly, there are all the wonderful prizes donated for the tour. Thank you Atelier Fiber Arts & Abrakdabra, Bra-Makers Supply, Braphoria, Central Sewing Machines, Chelsea C Designs, Closet Case Patterns, Crookshanks Custom Textiles (I’m totally envious of whoever wins this one), Fabric Please, Favorite Things, Funky Monkey Fabrics, Libelle Sewing, and Midnight Mountain Fabrics. (Oh, I’d like any or all of these prizes!)

Behind the Scenes Highlights!

 Now for some behind the scenes fun! Let’s talk about a few things that went on while getting ready for the tour!

Don’t Get Your Knickers in a Knot!

Lisa made some hipster panties. She was questioning her fabric placement ability after putting that gold LOVE smack dab… well, you can see for yourself.

Lisa also had to draw on her own sewing experiences when she put off sewing until close to the end of the tour and found she was missing a page of instructions! There wasn’t enough time to get a new pattern and get the panties done in time. I wonder if that could have been the pattern placement page.

You Don’t Say

Rachelle and I both made the Sweet Sixteen bralette pattern. In fact, we not only both made the same pattern, we found the same material! Yup. It’s gorgeous, and we both loved it. We both almost made the same bralette out of the same material.

That Didn’t Work!  

I had a whoops moment I shared with the other bloggers. I called it when bad things happen to good cups. That gorgeous material I couldn’t resist? I had some technical difficulties with my machine… and then my seam ripper.Yes, that’s a hole in the middle of the cup, probably right about where the apex sits in the cup. There were jokes about leaking cups!

I wasn’t the only blogger who had trouble with my materials. Marsha shared with us how her crepe crept off the table and she cut one side of it 1-inch too deep!

 Kids Say the Cutest Things!

Jessica had a laugh when her toddler asked what she was sewing. She said ‘a bra’, and he replied…” a broccoli?'” Nope. Can’t sew a broccoli! It doesn’t fit with our soft-cupped theme either.

Deb told us her girls loved the nightdresses she made for them. They found them a little cold to sleep in now the weather is turning, but had a perfect solution: They suggested going on vacation. I like they way they think!

Name that Movie!

Michelle made the Romy bra, and Marsha reminded us all of the movie Romy and Michele’s High School Reunion.

Do you think we could get that out of our heads once it got in? Hmm, I wonder if those are soft-cupped bras they’re wearing?

Fitting

A number of us dealt with fitting issues. Cups too big, bands too big. I don’t know if anything fit perfectly the first time around.

There was one comment made to us about the patterns all being for skinny bodies. Nope. That’s not the case. More than one of us does not fit into that category anymore. We really enjoyed calling each other skinny after that though.

We really do have a lot of fun on these tours, and hope you enjoy them too! So, we’ve wrapped everything up, thanked everyone. All that’s left is for you, our readers to win a prize! I want to hear if one of my readers wins a prize!

Giveaway

a Rafflecopter giveaway (This giveaway has ended.)

 

Prizes

Tour Discounts (These tour discounts have ended.)

  • Funky Monkey Fabrics is offering a 10% discount for the duration of the tour. Use code: CC10 for 10% off store wide until October 22nd. Not valid on already discounted full bolts.
  • 20% discount storewide at Fabric Please. Use code CANADACUPS.
  • 10% discount from Central Sewing Machines. Orders must be mailed to Muriel @ centralsewing.com to have the discount applied manually.
  • 10% discount from Midnight Mountain Fabrics. Use the code CANADACUPS10
  • Free shipping from Club Tissus on all orders over $100. Use code: livraison100
  • 10% off a retail purchase from Libelle Sewing with $15 purchase. Use code: CANADACUPS

   If you missed any of the tour, here’s the schedule again.

Sunday, October 15

♥
Monday, October 16

♥
Tuesday, October 17

♥
Wednesday, October 18

♥
Thursday, October 19

♥
Friday, October 20

♥
Saturday, October 21

♥♥
Monday, October 23

  • Giveaway winners announced on all the blogs:

Little Heart Threads, Glitter in my Coffee, Michelle’s Creations, Mrs. Weaver’s Finest Unmentionables, Gracious Threads, Élégantine!, That’s Sew Venice, Sprouting Jubejube, Flying by the Seam of my Pants, Filles à Maman

Canada Cups – Coming Unwired in a Bralette

~ Michelle ~ 6 Comments

Hello! Welcome to my stop on the Canada Cups – Coming Unwired blog tour.

This tour is all about soft cupped bras in their many forms, whether it be bralettes, camisoles, or actual soft cupped bras – all designed by Canadian Designers. For my stop, I’m making a bralette from the Pin-up Girls Sweet Sixteen Bralette Collection.

The Pattern

Beverly Johnson is the designer of this pattern. Beverly owns Bra-Makers Supply here in Canada, and is one of our amazing sponsors! Beverly was willing to provide a pattern to a reviewer, but I’m such a pattern hound, I already had a copy of this pattern. Rachelle of That’s Sew Venice gladly accepted that offer though, so we are both making the Sweet Sixteen bralette pattern. You can read Rachelle’s post here.

A Few Details About the Pattern 

Beverly says, “Most would not say “support” and bralette in the same breath, but oddly enough, this one can be very supportive. With the options this pattern offers, this bralette could become your new breast friend! The typical ready-to-wear bralette is only available in smaller sizes..not ours!”

It’s because this pattern offers both support and a fuller range of sizes, that Rachelle and I both wanted to make this bralette. Just so you know, there are 72 sizes included in this pattern.

A little later in the post, I have some ideas to share with you about making this bralette more supportive.

Another Sponsor – Club Tissus

Another of our fabulous tour sponsors right here in Canada is new to me: Club Tissus. They very generously offered the tour bloggers a discount and free shipping to try their merchandise for this tour. Thank you, Club Tissus!

My thoughts were, ‘A deal on lingerie supplies?’ I went to their website right away.

My first impressions were, well, it was all in French. I do know some French, but am not familiar with French material names. Then I found the box in the upper left corner that allows us to switch from French to English. (Whew!) That was better. I had no trouble navigating their site after that.

I bought this gorgeous mesh to use for the cups.

I found everything I needed to make my bralette there except neckline trim elastic. I had some of that in my stash.

Living across the country, mine took four business days to arrive. That’s still really good. I did have one mistake with my order, and after emailing them, they had the right item in the mail within a day.

Set Backs

I had a couple of set backs with my plans for my first bralette (okay, there were three all together) – which is not something you want to happen when a sponsor has donated your material!

My first was mistake with this material wasn’t a mistake, and I should have stuck with it. I simply cut out cups from the material – no matching, just random cut outs. But no, I decided I could do better and I tossed those cups out. (Remember this bit for later.)

Then I decided to use the colored part of the mesh. I didn’t like that once it was cut out and sewn. It was too multi-colored. Those went in the garbage.

Next, I was going to match the patterns. It turned out I wasn’t able to match the print exactly for each cup. No matter where I laid my pattern pieces on the remaining fabric, I could not get a match. Unfortunately, I had already cut out one half of the bra and matching pattern designs takes a lot more material than not matching.

I let that idea go, and just cut out another set of cups – I was right back to what I first did, except it’s three cuts into the material later. I was on my way.While sewing the cups, and then top-stitching them, my machine decided to eat my material and made a big knot! As I gently tried to unpick the knot… I made a hole. 

Sadly, there’s no repairing that, and by this time, I didn’t have enough of this mesh to make new cups. I had to start over.

Take Two

  Thankfully, I was able to make this beautiful bralette with a stretch lace cup, and power net for the band from materials in my stash.

Oh, I love these colors together. This is the Platinum duoplex, power net, and strap elastic from Bra-Makers Supply. The lace is some gorgeous lace I found at Fabricland in Ontario. I really love these together.

I couldn’t find a 4 x 3 hook and eye in Platinum and I didn’t like it in black, beige or ivory, which were all I could find. So I lowered the back where the straps attach to use a 3 x 3 hook and eye.

 Here’s the side view. So very pretty.

 How does it fit? It fit quite well after I shortened the back band.

Here’s the band I cut out based on what I thought were my correct measurements. After re-measuring, I was an inch smaller than I thought. However, I ended up shortening the band to that red broken line. That’s more than just the inch difference. So if you’re making this pattern, which is a great pattern, just know the band fits big.

Once I had the band shortened, it was perfect. I’ve worn this for full days, and it’s very comfortable.

Support 

Using only stretch lace for the cups, I wasn’t expecting this to be the most supportive, but I would say it’s actually better support than any other bralette I own.

I thought of some options to make this pattern more supportive: Lining it with foam, which is an option mentioned in the pattern, but not my preference. Other options could be to line the lace cups with sheer cup lining, or some firm stretch mesh, or even duoplex. All of these would make this very supportive.

PHDs

  There are always the Projects Half Done. This was one of them. A lovely camisole pattern.  I bought the material for it; a gorgeous cotton/silk blend, and this lacy material I thought went well with it. I received the High Neck Camisole pattern from one of our wonderful sponsors, Lingerie Secrets.

As it turns out, I’m actually glad I didn’t get this completed because just before the tour started, I found an even better lace in my stash!The lace is a cotton lace too. I like this so much better than the original material I bought for this.

Thank You

I  want to express my gratitude to these wonderful sponsors for our tour! They’ve donated patterns, fabric, and findings to our bloggers, and have gone above and beyond and donated prizes for you – our readers.

Tour Discounts (These discounts have ended.)

  • Funky Monkey Fabrics is offering a 10% discount for the duration of the tour. Use code: CC10 for 10% off store wide until October 22nd. Not valid on already discounted full bolts.
  • 20% discount storewide at Fabric Please. Use code CANADACUPS.
  • 10% discount from Central Sewing Machines (email your order directly to Muriel@centralsewing.com to receive the discount)
  • 10% discount from Midnight Mountain Fabrics. Use CANADACUPS10 for the code
  • Free shipping from Club Tissus on all orders over $100. Use code: livraison100

 Come back here for our wrap up to enter into a draw for one of the prizes! Just look at these prizes!

Happy creating!

Tour Schedule

Hang with us as we reveal our inner secrets. 😉

 

 

 

 

// Please note that none of these post links are available before the scheduled date. If you click on one too early, you will get an Error 404: Page not found. You know about those, right? //
♥
Sunday, October 15

♥
Monday, October 16

♥
Tuesday, October 17

♥
Wednesday, October 18

♥
Thursday, October 19

♥
Friday, October 20

♥
Saturday, October 21

♥♥
Monday, October 23

  • Giveaway winners announced on all the blogs:

Little Heart Threads, Glitter in my Coffee, Michelle’s Creations, Mrs. Weaver’s Finest Unmentionables, Gracious Threads, Élégantine!, That’s Sew Venice, Sprouting Jubejube, Flying by the Seam of my Pants, Filles à Maman
♥

 

Another Watson for Em

~ Michelle ~ 6 Comments

There is nothing so comfortable as a comfortable bra! Or in this case, a comfortable bralette. When a bra is comfortable, there is no feeling of can’t-wait-to-take-it-off. You really forget you have it on. That’s how Em was feeling. She kept telling me how much she loved her Watson, and that she didn’t get home from work and want to take it off right away. I’m so glad.

Em’s last Watson.

This was all just bits of this and that I had in my stash. Despite that, I think it turned out quite lovely.

Hints 

As well as telling me how much she loved it, there were all the hints of what her favorite colors are, that she’d love another one, this was all she wanted to wear…

I got the hints. I dropped a few myself, like you have to buy some materials if you want me to sew you bralettes. Still, I really enjoyed making her something she loved. So… I’m making another one to get my sewjo back.

  Sales

 B,Wear has recently had a few sales. The first one I was aware of was a 35% off sale. I took advantage and I bought some elastics. I’ve found elastics were always what I was seemed to run out of first because I wasn’t willing to unpick it all, especially triple-zigzag stitches!

Along with my elastics, this lovely lace came from Bodil’s B,Wear shop. I used this for Em’s Watson. It’s gorgeous.

I’m matching it up with black to make a striking combination. White lace cups and cradle, black band, straps and findings. Em did say black and white were her favorite color combination.

Other Plans

Originally, I was going to use some more ‘bits’ that were left over in my stash for another bralette. However, once I was sewing with these ‘bits’ I realized the material was terrible! My machine hated it, and I didn’t want to sew with it anymore. After fighting with it and my machine for the better part of a morning, there was one more part that just wasn’t right; I couldn’t face unpicking it again. I turfed it and it felt great!

This is a really thin Lycra material. I still had some leftover after cutting this out, but it’s in a give-away bag now. Someone else might love it, but not me. Not anymore. Along with this, two other very similar Lycra materials are leaving my stash too.

Em’s Second Watson

    Here’s Em’s Watson. I really love how this one turned out as well.

Oh, it’s so pretty. The black and white is so classic.

Here’s the side view: There was a lot of switching thread for this bralette. I only made one little mistake on the first color change. I went over the seam by a couple of stitches.

Other than that, I was quite pleased with all my switching back and forth.

Here’s the back of the bralette.

Seeing as I know this size fits her, I sewed the bow on already. I took advantage of the black and white color scheme to put a black bow on the front.

 Here’s a little tip for keeping these bows in place while getting it all under the presser foot – use a little bit of double-sided tape. You hardly need any, and it will wash away in the laundry, but it keeps it right where you want it until you sew it in place.

There’s only one thing I don’t love about this lovely bralette. The rings and sliders are one size too big. I don’t have any 3/8″ ones. Well, I did have a few but they were plastic, and I know plastic won’t survive being stepped on. (I never asked. I didn’t want to know.) The smallest size I have are 1/2″ ones, and as you can see, they’re a bit too big. I did try moving them, and they seem to stay in place quite well.

The most fun I have sewing for Em is hearing the exclamations coming from the other room when she’s trying something on: “It’s so cute!” I just don’t yell like that over any of my makes for myself. I might have a little more sewjo if I did.

The lace for this bralette came from B,Wear, the elastics from Bra-Makers Supply, the straps from Merckwaerdigh, and the power net from a new supplier to me – Club Tissus.

Happy creating!