Designer Bras by YOU!

A Tester, A New Pattern, and Duh!

~ Michelle ~ 2 Comments

Do you ever do something, and then wonder, What was I thinking?’ Well, I was either over-thinking or not thinking at all!

Here’s the lovely bra I made:

Duh

You saw a bit of this last week. It’s lovely, the fit is pretty good. I’m still not quite getting the bridge back to the chest wall (Grrrr!), but it’s almost wearable.

Almost. Did you notice that. I did wear it and here’s what my problem was: the underwire was flipping up at the front under the bust and twisting along the bottom of the bra! What? This was a completely new one for me. I had no idea what wasn’t working. And it made it a bit uncomfortable.

So a call to Bra-Makers Supply and a question for Beverly. It kind of felt like deja vu – her answer was similar to one from a long time ago in my journey – something was either too big or too small. Last time it was the wires, this time the cradle.

And yes, duh! The cradle was too big. I have no idea what I had been thinking but I did not use a 38 cradle – used a 44 and folded it to take away some of the width. I eye-balled it, but clearly not well enough. There was an inch in there that needed to come out. It should have been so simple – use a 38 cradle and make it the same length as the 44.

So, one bra that is in the pile to take apart and redo. I don’t love fixing my mistakes, so I have a pile of them and they wait for me. That bra is now in the pile. I’ll pin a note to it so I don’t forget why it’s there.

So, this week, I made a tester for my friend. Thankfully, she is an easier fit than me. Her cup and wire size match. That makes it a LOT easier. However, I did up a 30 F for her, and the band is too big and cup too small. I do know her wire size, so I can figure out where to go from here for her.

One thing she commented on, that I haven’t loved either – she wanted more lift in the cup. I understand that – I need all the help I can get.

So, off to the drawing board again. I know from the Bra-Makers manuals that the straighter the upper cup, the more lift the cup has. Hmmmm. I thought about the patterns I have with a really straight upper cup. But none of them are ‘classic’ patterns.

I used what I knew from making my own Shelley pattern from the Designer Bras By YOU! CD, and did it backwards.

I used my Sewy Rebecca upper cup and put it together with the powerbar from the pattern.

With Power Bar

Then I re-drew it.

New Classic Upper Cup

I added the strap tab, and gave the top a nice smooth curve rather than the straight edge for lace. On this one (which is reversed, sorry) I also took in the under arm.

Here’s the tester I did with my new pattern:

Brown Tester

It’s almost there. I tried this one before I did any adjustments just to see how it would fit. I found out I did need to take in the underarm in both the upper and lower cups, take in a bit of the length at the wire line, and add a bit to the bridge depth. So, I’ve adjusted my pattern, and I’m off to cut out my new pattern.

I do have another pattern that has an ever straighter upper cup, so I may do this same technique with that pattern this week too.

Happy creating!

And This Time With Seam Allowances?

~ Michelle

I enjoy reading news online, and usually check what’s new before I read my emails in the morning. One morning there was a video saying what NOT to buy your girlfriend for Valentine’s Day. That got my attention, and I figured it was going to be something to do with lingerie.

And it did have to do with lingerie. Basically, men were being told not to buy bras for their girlfriends because bras were hard to fit. I had no problem with that – that is very true. However, it was the next part that really surprised me and stayed with me.

After telling men not to buy bras for their girlfriends, the video went on to offer help in bra sizing. Here’s their help: The Fruit Rule. If she’s the size of a couple of lemons, then she’s an A cup; the size of a couple of oranges, she’s a B cup; two grapefruits? she’s a C cup. And to finish it off nicely, if she’s the size of two cantaloupes she’s a D cup. Isn’t that nice and neat? I can’t speak for all women, but I don’t fit into that fruit salad.

Enough about fruit comparisons, I’m going to share a little more of my progress with my ‘adjusted’ Shelley pattern.

I’ve been mulling over my Shelley without seam allowances for a while now. I did add seam allowances and then got thinking about whether that was what I needed or not.

I made a tester bra to see how it fit with seem allowances and it just wasn’t giving me the fit I wanted. My dh says I’m trying to get a perfect fit, and I say,  ‘Yes, I do want a perfect fit.’

Without the seam allowances added, it fit perfectly into the cradle size I need. Without seam allowances the lower cup fit like a dream – something I’m struggling to achieve. However, without seam allowances, the upper cup was too small. I need more depth to get the bridge to sit against the chest wall, and a little more coverage up top too. I was torn between adding seam allowances and/or redrafting the upper cup somehow.

I decided to add a seam where there isn’t one – I added the amount of a seam allowance to the top of the upper cup, and also changed the pattern so I had the depth I need to bring the bridge back. It all worked. This one got a bow even, or as another blogger put it – it was bow-worthy.

Shelley front view

Here’s my latest Shelley from the front. I used the black forms I’d made and shown a few posts ago. They don’t fill the cups out completely, but I think they fit better than the foam cups did.

I love the lace and duoplex combination on this. The lace was from Merckwaerdigh’s store on eBay. The duoplex and findings are from Bra Makers Supply.

To help the upper cups fit a little better, I didn’t line them this time. On my first Shelley I did line the upper cups. Since I need a little more give there, no lining this time around. And that helped too.

Shelley side view

I have to say, I LOVE how neatly the cups are fitting into the cradle. I am so very pleased with how this has turned out. I didn’t like the look of the ‘easing’. I had to do so much easing along the lower cup, it looked more like gathering to me. And it gave the cups a balloon-like shape. This is much better.

Shelley back view

And a basic back. Looking at it, the straps seem a bit far apart, but I didn’t notice that when I put it on. Something to think about tweaking for my next time.

I got my ‘real’ Shelley pattern in the mail today. Tomorrow I’ll have some time to pull it out and compare all the pieces to what I’ve made from the Pin-Up Girls Classic pattern and CD Designer Bras by YOU! I have to say, I loved learning how to make this, but it will be a treat to have the pattern too.

My next project may be to help out a friend. She recently went to a specialty store and was fitted only to find out they don’t carry anything in her size – too small around the rib cage. After dealing with the fitting challenges of the Omega shape, a small band almost sounds simple. I’ll post what we do, and how it turns out.

Oh, and my dh is also requesting matching panties, so that may be in the near future too. Two other bloggers have just offered free patterns, and I’m planning on trying both of their patterns.

http://www.madalynne.com/

http://www.fehrtrade.com/article/676/free-lacey-thong-panty-pattern

Happy creating!

Shelley is coming February 1st!

~ Michelle

Now, this might seem a little silly to some, but I’m very excited. I was just on the Bra-Makers web site and saw that the Shelley bra pattern will be available on February 1st. That is very exciting news to me.

Now, the reason it might seem silly is I made this pattern for myself from my Pin-Up Girls Classic pattern & the CD Designer Bras by YOU! So I have a pattern. However, I only have it in my adjusted or altered pattern size. It is a wonderful pattern, and makes such a pretty bra it will be nice to have the real pattern. (that if I use, I have to adjust!) But it will be a wonderful addition to my pattern collection!

PB-3230%20Shelley

This is the Shelley pattern picture from Bra-Makers supply.

Shelley Pattern

The Shelley and the Sewy Rebecca patterns are very similar in that both have lace upper cups and a power bar, but the Shelley has a two-part lower cup whereas the Rebecca only one.

From a few things I’ve either read or heard, a few people have been interested in trying the Rebecca pattern, but are hesitant because it has to come from Europe and/or isn’t in English – I HIGHLY recommend all the patterns I’ve ordered from Bra-Makers’ Supply and this would be no exception. Even though I’ve made it, I’m ordering it!

Happy creating!