Life of a Fairy Bra Mother

A Modern Floral Shelley and The Bra-A-Week Challenge

~ Michelle ~ 16 Comments

My most recent Shelley is a bit of an experiment for me. My experiment was in the materials I used. I usually use Duoplex for my bra cups. On this bra, I used the Lycra that came in the Merckwaerdigh kit and then lined it with Sheer Cup Lining. Seeing as there’s no stretch in the lining, I thought it would work.

il_570xN.672896523_cb2l

Isn’t that pretty? I loved it the moment I saw it. And I’ve learned, when I see something in Margreet’s Etsy store that I love, I buy it right away. I’ve found if I wait, it’s gone. My challenge with using kits from Merckwaerdigh is I need the support of Duoplex or something non-stretch. If I use Duoplex underneath the Lycra, it’s getting to be the cost of two bras. I wanted to try something different.

I had a little more trouble sewing Lycra than I do Duoplex. I’m not used to sewing stretch when sewing my cups. Here you can see where I made a little mistake in my sewing.

Mod Blue Shelley

Look at that wrinkle. I decided it was a small cosmetic error, I’m going to give it a cosmetic treatment – cover it up.

I love this material, but there was one big downside to it – all the shades of blue in it. I planned on using a Navy findings kit from Bra-Makers Supply, as well as Navy Power Net from them. So, I needed Navy thread. Fine. I got Navy thread. When I sewed the elastic on the back of the lace though, the Navy looked terrible. So, off to the store to match some thread to the lace. The thread that matches the lace, doesn’t look great on the Lycra. Sigh. I wasn’t going to buy a third spool of thread for the bra, so the Navy thread is now a design element on this bra.

front

Here’s the bra from the front. I love those three little bows at the front. And those little bows … they’re all me-made. The Merckwaerdigh kits don’t come with bows. The only bows I had really didn’t go with the colors of the bra, so I looked at my ribbon stash. This golden ribbon was the only one that went well. It’s really fun to make ribbons, and easy. I shared how in this post. I used the cardboard method, but the fork method looks like it produces a lovely bow as well.

three bows

Here are the bows all finished and sewn on with a blue bead in the center. It hides that little wrinkle pretty well.

back

Here’s the back of the bra. I did over-calculate how much I had to add to the band using the new, stronger elastics from Bra-Makers Supply. You can read about those elastics here. I had to cut a bit off both sides to make it perfect for me, and next I’ll adjust my band pattern.

So, how did my experiment go? The bra fits a touch looser than when I make it from Duoplex. The only place I noticed any wrinkles at all were under the arm where I already have to make an adjustment. Now, if I could only sew Lycra more neatly and without wrinkles!

Now onto the Bra-a Week Challenge submissions!

This is week 25 of the Bra-A-Week Challenge, and this week we have some very beautiful submissions along with my own.

The first bra is from Sofia. It is such a delicate work of art inspired by a one of her favorite lingerie brands.

Little-Black-Bra

Here’s Sofia’s Little Black Bra. Isn’t that gorgeous? Sofia used Eyelash lace backed with nude Power Net to achieve the look on the front of the bra.  As well, she took careful attention to match the lace on the cups. All that extra attention does show. She finished her bra with black Power Net for the band and a 3 Hook and Eye set. Stunning!

You can read more about Sofia’s inspiration and Black Lace Bra on her blog Silver Lining. So very lovely!

Our second bra this week is from France and it’s actually a set of bras, not just one.

IMG_2287

I can’t even imagine how wonderful it would be to have someone make custom-fitting bras for me. France is making them for her Mom. What a wonderful thing!

Look at all these beautiful bras! This is what you can do once you have that perfect pattern.

IMG_2288

This photo shows the back of the bra. Look at how perfectly the whole bra fits! And it looks really comfortable too with that full back. That’s just so great!

Our next submission is from David of Bonnet Bleu. It’s another lovely delicate looking bra. David made this bra using Black tulle and white lace for his triangle lace cup bra with nude bra cup foams.

Zdj cie0469

The black is more visible here from the side. The wings are black. So very lovely and delicate looking.

Zdj cie0472

David is a freelance lingerie designer, label: Bonnet Bleu.

Happy creating!

The Flexible Wire Experiment

~ Michelle ~ 2 Comments

I did a little bra-wearing experiment. I still wasn’t 100% happy with my fit. Do you get the idea I’m looking for perfection? I am!

At the end of the day, I could see when I undressed, the wires I was using weren’t fitting me perfectly. I also knew from experience that a size smaller felt like it pinched a bit. So, if the size I’m wearing is too big, and one size smaller is too small, where did that leave me?

I’d read something recently about the flexible wires available at Bravo Bella, Needle Nook Fabrics, and Sew Sassy. I decided to give them a try and see if they’d solve my wire problem. I ordered three sizes from Needle Nook Fabrics – 36, 38, and 40. Anne St. Clair was so very helpful. I must say, women like Anne and Beverly Johnson are a tremendous help to us non-professional bra-makers. Thank you!

I could tell with just a glance that the 40 wires were the same size I’d been using, so I ruled them out, initially. The 36s felt perfect but were too short for me to use. That left the 38s. I popped out the Vertical wires I’d been using from my most recent Black Butterfly bra and wore the flexible wires for a day. (Here’s a confession: I didn’t even sew the seams up!)

Here are the two 38 wires  – one regular and one flexible:

100_2951

And this second photo shows just how much these flexible wires can flex:

100_2952

That’s tremendous. There’s no way a regular wire is going to move like that! As well, the flexible wires don’t splay outward anymore than the regular wires I’d been using did – I checked. They flex inward.

Just before I popped those new wires in, I pressed them together to make the curve a little narrower. On the Bravo Bella web site, Monica Bravo has a couple of videos about the wires, and on one she explains how they can be shaped. That sounded perfect to me.

At the end of the experimental day, I could see these wires were a much better fit for me. Yay! I now have a nice little stash of flexible wires on their way to me.

Now to adjust my pattern to help with the wire fit. I’ve learned though, change one part of the bra pattern, and it means changing something else. Now I decided to look at the cradle those wires are fitting into. What I’ve been using is drawn from a 38 wire cradle that I lengthened to fit the 40 Vertical wire. I wanted to change that. Clearly, the channel that fit a 38 wire was too big.

In this photo, you can see the bridge and then the 36 and 38 cradle lines. There’s not a lot of difference between the cradle sizes, but I think one size will be just enough to make things a little more comfortable and fit better. The main problem with a cradle that’s too big is the weight of the breasts will push the bra frame down and you won’t get the support you need. The cradle really needs to fit.

I traced the 30E on this pattern (the smallest cradle size on it). I’d been using the 32E cradle for my last few bras. I’d even tried the 34E cradle, which would normally take  a 40 wire, so I would have fewer cup alterations, but I found it really didn’t help with my fitting issues – just my alteration ones.

100_2955

So, out came my pencil, eraser, and medical exam table paper. I traced of the 30E cradle and then laid my custom pattern pieces over that to add those aspects to the pattern – the narrower and lower bridge, adjusting for a flat spot, thinning out the elastic under the bust, and raising up the side 1/4″.

At this point all the alterations were good to go. In fact, you’ve seen them! I used them all on my last bra – the Sewyfied Shelley. That bra is my best-fitting bra! There are only a couple of cosmetic changes I want to make at this point. What a great feeling that is!

Happy creating!

La Bella Luna

~ Michelle

I hope all my Canadian and American readers both had wonderful holidays. Canada’s birthday is July 1st, and America’s is July 4th. Let me tell you, there’s one week a year where most of the continent is celebrating.

I just finished the cloned bra I made for a friend of mine. and it looks so pretty. Prettier than the pictures show. And she LOVED it. She exclaimed when she saw it that it was prettier than the original. Well, that made me feel good!

100_2284

She chose Ivory & Pink for her colors. And they really do look so nice together. All supplies came from Bra Makers Supply. Here’s a close up of the set we bought at Bra Makers Supply.

Trio%20ivory%20ivory%20pink%20and%20ivory%20lace

And the back of  her bra.

100_2287

It all went together quite smoothly. Cloning is easier than pattern adjusting!

There were a few things I noticed on this bra that were a bit different than I was expecting. One was on the original bra, the manufacturer only used 1/2″ band elastic – if it was that wide. I was really surprised when I saw it and how narrow it looked. I didn’t measure it, but honestly, it looked like the same as the upper band elastic. I changed that to 5/8th width which is more supportive and should be more comfortable.

Changing the size of the elastic meant I had to add that extra bit to the pattern I traced. That wasn’t a problem, but there was not room for all that elastic under the cups. So, with bated breath, I followed the advice Beverly gave in a recent blog. She explains how to cut the elastic so it will fit under the wire.

I read her blog and thought, ‘that makes sense’, but then when it came time to actually cut the elastic! Oh, my! What a terrifying feeling. I had just spent hours sewing this bra… and it’s for someone else… and she paid for all the materials… and I’m about to cut it! Can you feel the drama there? Well, I can tell you I’m so very thankful it all turned out.

But I didn’t just cut the elastic. That was too big a step for me, so I took a preparation step first. To help me feel more comfortable cutting, I folded the elastic over the seam where the cups were sewn into the cradle – that same seam the channeling will be sewn onto – and then traced on the elastic where I could feel the seam underneath the elastic. Sorry, no pictures of that. I was busy holding my breath that it would all work out! Then I simply cut along that traced line. It all worked perfectly. When I do this again, I’ll take pictures to show you.

100_2291

On this slightly blurry picture (Sorry, technical difficulties), you can see the elastic is much wider at the lower bridge than what can possibly fit under the channeling. Trimming the elastic is a great option.

As well, on the above picture you can (barely) see the seam in the bridge. That was another one of the surprises I found on the original bra. Most patterns I’ve come across have the bridge cut on the fold. This original bra had a seam in the bridge. So I added a seam allowance to the bridge, and seamed both the duoplex on the front of the bra and the sheer cup lining.

Again, not super clear, is the lower cup of this bra is lined and there is a vertical seam in the lining. It shows up much better in this photo of the original bra.

prima-donna-luna_0162626_fdp

That seam line that is visible is actually in the lining, not in the lower cup. So I copied that as well.

The only finishing touch I’d still like to add are a couple of bows to cover the strap seams. They always make it look so much prettier.

One last surprise on this original bra was the lower cup fabric is stretchy! That one doesn’t even make sense. When dealing with cups larger than a C why would a manufacturer use stretchy fabric? It’s not supportive. So one negative is my friend said she could use a little more room in the lower cup. It fits and she’s still thrilled with it, but we’re thinking of changing things up for her next bra. I’m thinking the Shelley bra will be perfect for her.

And lastly, my friend, Jan, really loved her apron. She wanted a picture of her wearing it for the blog. Not only her wearing the apron, but she grabbed a spatula from the kitchen to make it look like she was busy cooking too.

100_2240

Happy creating!