Month: July 2014

The Other Apron

~ Michelle

A few weeks ago I posted about an apron I’d sewn for a friend. And she loved it! I just finished the second apron. And it’s just as cute and original as the first apron was. The apron is a pattern I bought on Craftsy. It’s a pattern by So Sew Easy. She has a number of free patterns I’ve been looking at, and will try at some point. The apron pattern is the Reversible Apron – I’ve got you covered!.

100_2370

The colors of this material are so beautiful. I really enjoyed working with them. And I’m saving all the little bits for that quilt that I’m going to sew one day.

I did make a few changes to this apron. The first change was, it’s not reversible. For that reason, I won’t review the pattern, except to say I do like the pattern, and the instructions were clear up to sewing the two sides together, which I didn’t follow or even read. For that reason, I don’t feel it’s fair to give it a review. But for how I used it, I had no problems.

Another change I made was to add a bow to the front. When I looked at the apron front, I just felt it needed something. My dress form, Catherine, is so small in the waist and hips that the apron ties go right around her and the ties made a bow in the front. When I tied the apron at the back as it is above and will be how my friend wears it, there just seemed to be something missing. So I added a bow in the same glittery black fabric.

100_2371

Here’s one of the sides. I love these adorable pockets! They are so cute. They’re from the same material I used for the front panel on the first apron, but smaller. They’re perfect for pockets.

100_2372

Here’s a close up of the pocket. The folksy theme is so charming to me.

100_2373

Here’s the other side, using a different patterned theme for the pocket.

100_2374

I think I mentioned I love the musical theme to this fabric. I’ve played piano since I was 4 or 5, so it’s bringing a couple of my loves together. And in such a pretty way.

And the last change I made, which I didn’t do on the first apron, was to leave the overlock stitching showing. I decided I liked how it looked on this one, and let it be part of the design of the apron. It doesn’t show up very much against the batik material, but really pops out against the black glittery material.

100_2375

Happy creating!

A Black Plunge with Butterfly Effect

~ Michelle

I must say, I was inspired recently after reading Madalynne’s blog where she planned to do a bra-making marathon. (Way to go, Madalynne!)  I was inspired and thought I’d see what I could do too.

So bright and early Saturday morning, I cut out 2 bras. One in black with some gorgeous black and pink lace. The second bra is a beige, with a pretty beige and tan lace. Both sets are from Bra Makers Supply. I was off to a good start. Then reality began to impinge on my plans. I had laundry to catch up on, and my dear hubby and son arrived home after a 4-day camping trip. But I did make some progress.

The black bra was the first one I worked on. And it was coming together very well. Until I hit a bump. Perhaps because there was so much activity happening around me that wasn’t usual activity, whatever the reason I made a faux pas after attaching the upper band elastic to the outside of the strap. I didn’t notice it either. It wasn’t until I had turned the strap over and was trimming the excess, and had a brief thought as my scissors snipped the material, ‘that looks folded’. SNIP.

I’m not sure how I folded excess material under the elastic, but I did. And then I cut it! Ouch. Well, I know me too well; I’d never accept that. I knew I wouldn’t wear it if it had a flaw. So, out came my trusty seam ripper, and I carefully started removing all the stitches from the strap. First, I removed all the stitches from the elastic I’d just sewn on. That wasn’t too bad. That was just a zigzag. But the side with the trim on it had both zigzag and 3-step zigzag stitches that had to come out.

I got it all done, and attached a new strap. I re-sewed all the elastic and trim to the outside of the strap, and then carefully turned it and matched it up and sewed the 3-step zigzag. And it looks good. Whew.

Okay, enough drama. Here’s my black plunge with a Butterfly Effect.

100_2317

I think the Butterfly Effect is more pronounced when the style isn’t a Plunge style, but I’m still very happy with it. It’s a very pretty way to add some lace to a bra. And I do like lace.

100_2316

Here’s a closer view of the Butterfly Effect. You can also see the foam cups I have behind the cups. The way a Butterfly Effect is done is a bit unusual. You start to sew the cups together, stop, add the lace, and then finish sewing the cups together. This effect is shown and explained in detail in the Bra Makers Manual.

The little pink bows that match the pink so perfectly were from the Bra Maker’s teacher I had here one weekend. (I’ve had the lace in my stash that long.) She had a big bag of bows and I think I might have drooled when I saw it. She let me match up a few bows to lace I had. Thanks, Jane.

100_2312

Isn’t that adorable? I took the picture before I had sewn the bows on.  They’re just pinned on at this point. But what a great color match.

100_2313

Now on this one, there are two pins. One is holding the bow in place for where it will go. the red-headed pin is to make sure I remembered, once the bra was all sewn, which strap I’d messed up. Looking at this, I’m really pleased with how well I repaired this faux pas.

100_2315

And the back of my newest plunge bra. I may tweak this back a bit and bring the shoulder straps in a bit. They’re not falling off my shoulders, but they do look quite far apart when I look at the back. Something for me to think about.

And that second bra I cut out? Well, it’s all cut out and sitting on my desk just waiting for me to have a few hours to myself to begin it.

100_2309

The good news is, it will wait.

Happy creating!

La Bella Luna

~ Michelle

I hope all my Canadian and American readers both had wonderful holidays. Canada’s birthday is July 1st, and America’s is July 4th. Let me tell you, there’s one week a year where most of the continent is celebrating.

I just finished the cloned bra I made for a friend of mine. and it looks so pretty. Prettier than the pictures show. And she LOVED it. She exclaimed when she saw it that it was prettier than the original. Well, that made me feel good!

100_2284

She chose Ivory & Pink for her colors. And they really do look so nice together. All supplies came from Bra Makers Supply. Here’s a close up of the set we bought at Bra Makers Supply.

Trio%20ivory%20ivory%20pink%20and%20ivory%20lace

And the back of  her bra.

100_2287

It all went together quite smoothly. Cloning is easier than pattern adjusting!

There were a few things I noticed on this bra that were a bit different than I was expecting. One was on the original bra, the manufacturer only used 1/2″ band elastic – if it was that wide. I was really surprised when I saw it and how narrow it looked. I didn’t measure it, but honestly, it looked like the same as the upper band elastic. I changed that to 5/8th width which is more supportive and should be more comfortable.

Changing the size of the elastic meant I had to add that extra bit to the pattern I traced. That wasn’t a problem, but there was not room for all that elastic under the cups. So, with bated breath, I followed the advice Beverly gave in a recent blog. She explains how to cut the elastic so it will fit under the wire.

I read her blog and thought, ‘that makes sense’, but then when it came time to actually cut the elastic! Oh, my! What a terrifying feeling. I had just spent hours sewing this bra… and it’s for someone else… and she paid for all the materials… and I’m about to cut it! Can you feel the drama there? Well, I can tell you I’m so very thankful it all turned out.

But I didn’t just cut the elastic. That was too big a step for me, so I took a preparation step first. To help me feel more comfortable cutting, I folded the elastic over the seam where the cups were sewn into the cradle – that same seam the channeling will be sewn onto – and then traced on the elastic where I could feel the seam underneath the elastic. Sorry, no pictures of that. I was busy holding my breath that it would all work out! Then I simply cut along that traced line. It all worked perfectly. When I do this again, I’ll take pictures to show you.

100_2291

On this slightly blurry picture (Sorry, technical difficulties), you can see the elastic is much wider at the lower bridge than what can possibly fit under the channeling. Trimming the elastic is a great option.

As well, on the above picture you can (barely) see the seam in the bridge. That was another one of the surprises I found on the original bra. Most patterns I’ve come across have the bridge cut on the fold. This original bra had a seam in the bridge. So I added a seam allowance to the bridge, and seamed both the duoplex on the front of the bra and the sheer cup lining.

Again, not super clear, is the lower cup of this bra is lined and there is a vertical seam in the lining. It shows up much better in this photo of the original bra.

prima-donna-luna_0162626_fdp

That seam line that is visible is actually in the lining, not in the lower cup. So I copied that as well.

The only finishing touch I’d still like to add are a couple of bows to cover the strap seams. They always make it look so much prettier.

One last surprise on this original bra was the lower cup fabric is stretchy! That one doesn’t even make sense. When dealing with cups larger than a C why would a manufacturer use stretchy fabric? It’s not supportive. So one negative is my friend said she could use a little more room in the lower cup. It fits and she’s still thrilled with it, but we’re thinking of changing things up for her next bra. I’m thinking the Shelley bra will be perfect for her.

And lastly, my friend, Jan, really loved her apron. She wanted a picture of her wearing it for the blog. Not only her wearing the apron, but she grabbed a spatula from the kitchen to make it look like she was busy cooking too.

100_2240

Happy creating!