Drafting

Bra-Makers Challenge – August

~ Michelle

I made a matching set for my August Challenge –  Lacy Days of Summer! “Use 2 laces to create a bra, bralette, panties or corsets. Two is better than one!”

I’ve used my drafted panty pattern and two laces.These are my Hipster draft. I made these from black cotton Lycra, and two laces. The multi-colored lace is very light-weight, so that is backed with CL, but the pink/mauve lace is a firmer lace and is on its own with no backing. Because it’s firmer, I didn’t add elastic to the waist at the front either.

In fact, I think these qualify for three laces! There’s a narrow black lace trim at the legs and waist. That’s three laces in one panty!

Here’s the back of the panty.I fully meant to finish the back of the panty the same as the front, with both laces. However, I sewed these up on my trip to the mountains and didn’t remember to either: a) cut the lace out and pack it, or b) pack it. So these will only have the one lace on the back.

A Lacy Poppy

I combined testing the Poppy Bralette with the August Challenge to make myself a sweet lacy set.

Here’s my Poppy. The bralette can’t be part of my challenge entry because it’s not a Pin-up Girls pattern, and I didn’t draft it from BMS information, but I still wanted to make myself a set.For this Poppy, I made a smaller band and larger cup size than the first two. This one fits me perfectly.

I also kept the scalloped edge of the lace on this.  Poppy is an easy sew, with generous sizing. And it’s really comfortable and although this one is stretch lace and power mesh, it’s still supportive.

My Lacy Set

  Here’s my self-drafted panty and my Poppy set.I really wondered how I would like two laces together, but I really like this. And only having one lace on the back of the panty? Well seeing it from the back with the bralette, it works much better this way!

Happy creating!

I Didn’t Buy a Stand

~ Michelle ~ 4 Comments

A few months ago when I went to Sears to buy a mannequin, I didn’t buy a stand. The stands were all being sold separately. I momentarily thought of buying one, but they were priced the same as the mannequins and I wasn’t interested in paying another $50 for what I thought I wouldn’t use or need. For most of what I sew, using this display standing, as it is shown above, will be just fine.

However, this month the Bra-maker Supply Challenge is active wear, and I chose to make pants.

Pants aren’t going to display very well all bunched up on the bottom.

They don’t display the best pinned to Catherine either.These were the Barb pants I made a few years ago – pinned to Catherine. I guess it would work somewhat, but I’m not thrilled with this option.

Modification Ideas

I ran a few ideas past my husband to see what we could do to modify my mannequin to use the stand for Catherine.

One

One idea was to make an adapter out of wood. A larger hole that would fit over the stand, and a smaller hole with a steel rod inserted into it that would fit into the mannequin.

That might work, but it’ll take a little time, and skills I don’t have.

Two

.     Another idea was to use modeling clay and fill the leg cavity with the clay. Before the clay hardened, insert the stand so there would be a hole there when it did harden.

I decided against that idea because of the weight of the clay. I thought it would throw off the balance of the mannequin, and it might not balance on the stand.

I was out of ideas.

Shopping Trip Suggestions

    The next idea came from Em, my son’s girlfriend, when we went grocery shopping together. I was telling her my different ideas and she came up with one. She suggested Styrofoam.

Initially, I didn’t think it would work, but we stopped at the craft store to check it out. Hmm. It seemed harder and sturdier than I thought. It was worth a try.

First Attempts

Well. Styrofoam didn’t work. The weight of the mannequin, and balancing it are going to be the challenges here.

I couldn’t even balance it long enough to take a photo.

Catherine in Pants

  I decided rather than trying to pin the pants to Catherine, I’d put them on her. The stand is running all through one leg. They don’t look as bad as I thought the would. 

Yes, this will do for how often I plan to make pants.

These pants are my muslin for my March Challenge submission. I’m happy to say the basic fit is there. Now to play a little more with what I want to do with them. You can see, they’re basic black cotton Lycra, with a yoga waistband.I have a few changes I want to make to this pattern, but it’s mostly good.

Happy creating!

Drafting in Steps

~ Michelle ~ 2 Comments

My attempts at drafting my own bra haven’t been 100% to my satisfaction. My hubby says I want perfection. He’s not wrong. I’d settle for snuggled up beside perfection.

 Drafting First Steps

 I decided to go back to the Bra-makers Manuals and go over some of the steps in there for checking fit. The first thing to look at is the frame.

I decided I’d start over with my frame. The frame was fine, but I wanted to add some elements from the classes I took at Central Sewing, as well as some other design elements. This was a perfect time to re-do my frame.

Years ago, I cloned a Prima Donna Deauville bra I had, so I took some elements from that too. I gave my frame a wider cradle. I also gave the band a downward hike. It still has the lower bridge, and lower underarm.  Here’s my drafted cradle and the tester frame. This was pretty good.

One change I made. Do you see how little material there is there in the cradle to attach the cup? That 1/4-inch might be fine when making a bra, but it didn’t seem like much for the tester. I added another 1/4-inch. I also added a little more room under the arm.

For my tester frames, I use bits and scraps of whatever I have leftover from previous makes. Left over bits of elastic are especially great for a project like this.

Take Two

 The second new frame I made.This one is good too. And it will be much easier to use with the added material in the cradle.

I also gave myself a clear visual by sewing a seam line where the cup would meet the cradle. That’s the ivory stitching you can see in the above photo, and the one below.

I took a photo to show the difference between when the wire is in, and before it’s in the frame.That’s quite a difference the wire makes.

How Does It Fit?

  I’m happy to say this frame fits perfectly. My next endeavor will be to work on cups adjusted for my Omega shape.

Here’s the frame on my new display. It fits better on me.Everything is exactly where it is supposed to be. The bridge is right up where it needs to be, not pushed down, not coming away from the chest wall. The wires are just right too.

That’s the first stage of fitting a bra. Once the frame is correct, it’s time to test the cups.

Next Steps

After making a few adjustments to my pattern, I sewed up a pair of cups. I incorporated that adorable S-curve for the power bar.

I mentioned I’d sewn a seam in the cradle to follow. (I did this because I’d added that extra 1/4-inch.) I also sewed a 1/4-inch running stitch along the bottom of the cup. When it was time to sew the cups into the cradle, I just matched the two lines of stitching I’d done. So easy!How is it fitting? In all honesty, this probably would have been fine if I’d made it into a bra. It fit better than any RTW bra I’ve had. But I figured why not go for the brass ring. Seeing as this was still only a tester, I still made a couple of changes to my pattern.

I thought the cup might be a smidge small, so I clipped into the cross cup seam. Yes. I could add 1/8-inch there, so I did. I know an 1/8-inch isn’t a big deal, and like I said, if this had been a finished bra, I would have been happy with it. Since it was still a tester, I improved my pattern. Another adjustment was deciding if I wanted to lower the upper cups to meet the bridge, or raise the bridge a bit. I pulled out the custom bridge I’d drafted a few years ago, and decided to incorporate that into the frame. That means the cups won’t need to be lowered any more than they are now. The bridge will come up 1/4-inch to meet them. I’ll have to overlap my wires, but I’ve done that before.  Once again, I’m going for that perfectly matched cradle and cup at the side seam, and once the upper band elastic is added to the underarm of the cup, I’m going to have it! Yes, I’m happy with how this is all coming together.

Following Up

One last comment on the frame – a number of posts ago when writing about Tester Frames, I mentioned how hard it was to sew the cup into the frame once the frame was completed. Well, I took the wire out and it’s not hard. It’s not hard at all. The wire was what made it so difficult. Leave the channeling open for the wire, slip that wire out. It makes a big difference.

Happy creating!

A Pretty Ivory Bra

~ Michelle

Just before I heard about the Bra-Makers Supply’s Challenge that started in January, I was finishing up some touches on my bra draft. So this post is actually a make that’s a few months old now. The challenge created so many posts, but I didn’t want to leave this make out.

Here’s my draft again.I wanted to change the cups on this to make them a little rounder. I also wasn’t completely happy with my power bar. Something seemed a little bit off where the strap tab and the underarm were meeting. I also changed the band to a downward hike, but it needed work too. More on that later in the post.

All Those Details

 Before the BMS Challenge, the last number of bras I’d made had been slapped together. No top-stitching, no taking time with details. It was so nice to take my time and focus on some of those details again.

One detail was which sheer cup lining I wanted to use behind the lace. I have both white and beige. Hmm. There’s really very little difference between these two, but I decided to use the white. Seeing as my lace is a little bit darker than the ivory duoplex I’m using, I thought the white behind it brightened it up a bit. I even enjoyed taking my time with all the top-stitching. I was only finished the cups in the above photo, but they were so pretty I had to take a photo.

 My New Bra  

My bra looks perkier on the clear display form, and less East-West looking too. Catherine’s days as a bra display may be numbered! Especially now I have a display I can use for bras and panties.

Oh, but Catherine is my only display that is pinnable. She’ll still be getting use.

Do you see the upper band on this bra is a little slack? It’s that way on me too.

I used this band again on my red bra for the February Challenge after looking at all my measurements. This should have fit. The only thing I could think of was the I didn’t pull on the upper band elastic for this one. On the red one, I pulled on the elastic and it fits just fine.

Happy creating!

Aphrodite Slip Pattern

~ Michelle ~ 6 Comments

I recently saw a lovely panty pattern.

The Aphrodite slip by de Lingerie Academie. Here’s the image from their site. Oh, it’s so pretty!

Pleasant Surprises

I have tried so many panty patterns, buying them based on the measurements, only to find they don’t fit me. I was thinking these wouldn’t fit either. I still bought them.

My plan was to use my self-drafted pattern and alter it to have similar lines. That way I’d know they’d fit. Even though I’m using my pattern, if I’m going to copy someone else’s design so blatantly, I like to purchase it. I like to support these independent companies.

I did have a pleasant surprise when I laid my pattern over these. They were the same width. They are not the same length as mine however. It was still nice to find a pattern that was close.

Aphrodite Panties

Here is my version of the Aphrodite panties. I love the lace detail on these. It matches the bra I made for the Bra-Makers Supply January Challenge as well. Here’s my favorite part of them – the side view.Here they are from the back. It’s so pretty how the lace wraps around to the back.   The pattern is adorable. But, sadly, I’m not as in love with my version as I’d hoped.

What I Love and Don’t Love

  I really do love the look of the Aphrodite panties. I think the original design has a more elegant and classic look than mine. Using my draft for the base changed the leg opening, thus changed the look.

But.

I changed the leg opening because I know I won’t like the leg opening on the original pattern. I know I won’t like it for two reasons: One. It’s too low for my comfort. And two. I really really don’t like elastic at the legs.

If you take another look at mine, you’ll see I didn’t use elastic for the legs. I finished them like boyshorts – I just turned under the seam and sewed it up. No elastic. To be truthful, I hate elastic at the leg!

I was tempted to use lace trim at the legs like I usually do, but wasn’t sure how it would look with this style. I thought it might take away from the design, so opted to do a boyshort-style finish.

 How about that elastic at the waist? Although I can’t say I hate elastic at the waist, it’s still a strong dislike in my books. I much prefer lace trim there too.

So, although they fit, these aren’t the hit I hoped they’d be.

Not Giving Up Yet

I won’t give up on a mash-up Aphrodite-inspired pattern. I have some plans to revisit it for my February BMS Challenge. I’ve drawn out a few ideas using the shape of my hipster.The first one illustration looks quite minimal. The second one looks pretty balanced. The third one just has too much going on. What I like about these is they show me I can add the lace trim to the waist and leg openings and still maintain the design I’m wanting.

Happy creating!

Another Draft

~ Michelle ~ 4 Comments

I just finished another bra draft. And it’s not perfect, but it’s awfully pretty.

Draft Six?

To be honest, I’ve lost count of exactly how many drafts I’ve done. I’ve drafted a whole bunch of times to practice what I’m doing, but haven’t made them all up.  This is an ivory bra with a lace upper cup. It looks lovely, but the cup is a little bit too small.

Here’s the side view.

Despite this not fitting perfectly, I’m pretty pleased with how well it all turned out. I’m definitely learning with each draft I draw and sew up. This time around there were no oversights or mistakes like in previous attempts.I used gold-toned rings and sliders. I thought they’d look really pretty with the ivory, and they do!

The Good News

This bra not fitting perfectly isn’t all bad news. The band fits perfectly. I won’t need to make any changes to that at all. The previous bands were all a bit too big, or gaping here or there. This one is good.

 In the Bra-Makers Manual Vol. 2, Beverly Johnson says measurements should be taken while wearing a good fitting bra. This has been a big part of my problem.

Although the Conturelle bra I have fits, the cup material has stretch, so taking measurements in this bra gives me great measurements for another stretch bra, but not for a more supportive one made from duoplex.

With this sixth draft, I was able to take my measurements, and re-drafted one more time with those new measurements.

Things I Did Right

   So, how did that seventh draft work? It fits! It FITS!

I can’t even begin to express how happy I am right now. I never dreamed I’d make my own pattern from measurements, sew it up, and it fit.

  It looks a sight though. I said it looked a sight!

Number six became my tester bra frame because the frame fit but the cups didn’t. I re-drafted only the cups, and sewed them into the tester frame. It’s the tester frame that’s sticking out on the outside. To make things look even worse, well, actually, to make it easier to unpick to reuse the tester frame, I used black thread. 

If anyone is interested in how I made the tester frame, let me know and I’ll do a post on that.

Now to break into my stash and celebrate with a new bra.

Happy creating!

Sewing Plans

~ Michelle ~ 8 Comments

I always have a long list of things I want to sew, and since my sewjo has taken a late-summer vacation, I’m organizing some of my plans. At least I still feel I’m doing something and making some progress this way.

Another Watson

Em has told me so many times that she loves the Watson I made her. She’s hinted she wants another one. She’s told me her favorite colors. She’s mentioned she wears the one she has all the time. So, I have one cut out for her in this adorable polka dot material. I think she’ll like this. 

You might recognize this material from a previous Watson I made.

I love this polka dot material.

A Camisole for Me

  I found this gorgeous cotton-silk blend. Oh, it’s sumptuous. That’s really the only way to describe it. To make this even better, I found it in the clearance section at my local fabric store. That was just a bonus!

I also found some lovely lace material. Together, it will make a very pretty camisole.

This being such lovely material, I may look at some actual lace I have too and decide then. I just need some sewjo again. 

A Handbag for a Friend

   A dear friend of mine has been living in the US for the past year. She saw my Canada 150 bag, and said she’d love one too. I don’t have any of the original fabric left, so found some that was perfect for her. Her hubby used to be a Mountie. I think she will really love this! 

Aren’t those Mounties adorable?

Drafting Ups and Downs

You know, sometimes, I fuss too much.

My fourth draft (second with Karin) only needed small adjustments. I don’t know why I simply didn’t make those small adjustments to the pattern. Instead I went back and re-drew everything. I didn’t get the same results.

As well, I ran out of duoplex from my stash. I still have a couple of kits, but I wasn’t going to cut into those. I had to take a break from my drafting.

On that day, with no bits of duoplex left, and a draft that wasn’t what I wanted, I was ready to throw in the towel. For the better part of the day, I was defeated. I was giving up. I couldn’t sew. I couldn’t draft. I might as well delete my blog. I’m sorry I wasted all our money. Blah. Blah. Blah.

That’s when my hubby came to my rescue – he calmly told me I was doing well. Look how far I’d come. Then he told me to go ahead and order some more duoplex to keep going. He is my hero.

Future Plans

 Well, I do plan to finish all of these projects, including sewing up that fourth drafted pattern with a few adjustments. As well, I have a Spring/Fall jacket I want to make, and a Agnes top with sleeves. I have the material for both of these as well.

All of these projects are just waiting for me to get my sewjo back. I hope my sewjo doesn’t take too long a vacation.

Happy creating!

The Fifth and Final Draft

~ Michelle ~ 4 Comments

This bra is my fifth and hopefully my final draft at this time. I hope it’s… well, I hope it’s perfect!

My Fifth Draft

  I really went back and forth before I sewed this bra – Should I sew it with the water-soluble (WS) thread, or just sew up a bra. If I use the WS thread, even if this bra is perfect, I will be re-sewing it. I really didn’t want to do that. I just want to sew a bra. However, I finally decided to just sew up it as another tester with the WS thread.

This looks better than the other two, but you can see it’s still not finished as nicely as a bra I want to keep.

A wonderful little tip I heard after I’d sewn my first bra with WS thread is to use the thread in the needle only, and regular thread in the bobbin. Water will still dissolve the upper thread, and the seam will come apart just fine. I’ve also heard to just dab the seam with water, which would save a lot of the drying time, and ironing.

Changes

 My band was a bit too big. Well, an inch too big to be exact. I’d recently lost a little bit of weight, and of course my ribs being one of the smallest parts of my body, that was where it showed first.

So before I sewed up another bra, I re-drafted the pattern for my cradle and band with my new measurements. I didn’t mind re-doing it all either. I really want to get drafting down pat, so a little extra practice isn’t a bad thing as far as I’m concerned.

 More

I re-drafted the pattern for my cups, again too – just for more practice. In fact, I spent the better part of a day drafting over and over. I made three drafts of both the cups, and the cradle and band by time the day was done. 

One other change I made while I was re-drafting my cup pattern was to lower my strap placement.

In addition to the changes I’ve mentioned above, I made my usual adjustments: a custom bridge, lowering the upper cup to meet the bridge, and adjusting for a flat spot.

One thing I’m not having to adjust is the difference between my cup and cradle caused by being an Omega shape. Let me tell you what I’m doing differently.

A Different Change

I’d heard before that you can go up or down one size in the cradle from the wire size you’re using. So if you’re using a 40 wire, you can use a cradle made for a 38, 40, or 42 wire.

It’s the same if you’re using a 40 cradle – you can use a 38, 40, or 42 wire. You can go up or down one size.

I’m doing that with my drafting. I’m using a 42 extra-long wire to draft my cradle – that’s one size bigger than the wire I normally use. It just happens to be the same length as the wire my cup size normally uses. Does that all make sense?Do you see how the 42 Extra Long wire is the same length as the 44 Long wire? My cup size matches a 44 Long wire. I normally wear a 40 Long wire. Using a 42 Extra Long wire to draft my cradle size, I’m able to make my cradle match my cup size perfectly.

The Conclusion?

 Somehow the band is still a bit too big! I’m having to fasten it on the middle eyes, but that’s a small adjustment. As well, when I lowered my strap placement, I achieved a bit more Va-va-voom than I want. A few tweaks to my pattern and I’m sewing up a real bra next!

Happy creating!

A Fourth Draft

~ Michelle ~ 8 Comments

This is my fourth draft in all, and my second draft with some help from the amazing Karin, of Braphoria & Mrs. Weaver’s Finest Unmentionables renown.

 For this draft, I re-used the band, cradle and straps. I only had to cut the cups out again. I really recommend using the water-soluble thread for something like sewing a draft or muslin. Here are all my ‘bits’ after soaking them and letting them dry – just a quick low-temp press and they were ready to go again.The Fourth Draft

 Here’s my draft: 

This is pretty much spot on. The band is still a touch too big, but when I pull it in tighter, everything looks good.

You might notice this bra looks a little more finished than the last one. I just couldn’t stand what a mess that bra was. I had to do this one a little better; finish a few more bits to make it look neater rather than it all looking like it was falling apart.

Here’s a side-by-side of this one and the last one:You can see the cups are a little more rounded over the apex, and the bridge is a little lower.

Even though this draft isn’t as messy as that third one, it still has its messy parts. Just take a look:

 

The channeling isn’t finished, the elastic isn’t finished under the cups, threads aren’t cut, and bits of elastic are peeking out here and there.

Adjustments

So if it’s pretty good as it is, then what adjustments do I still want to make? Well, I feel the bridge could be a smidge lower. Not a lot, but maybe another 1/4″.

As I mentioned above, I need to take the band in a little more. That’s it.

Frankenbra

With the bridge being pushed out at the top, I was wondering if I needed more room in the cups or if it was just my bridge too high for me. So, to see better what was going on, I cut open the seams to see if it was more room in the cups that I needed. It turns out, I didn’t need to do that. The band not being tight enough wasn’t giving me enough pull or splay on my wires. When I pulled on my band, everything settled where it needs to go… except the very top of the bridge.

So, I’m making one more muslin or draft. I’m really wanting to make a nice bra I can wear. I’m trying to decide if I will or if I’ll just make another muslin. I’m really going back and forth as to whether I’ll make another draft, or seeing as it’s so close and these are just little details, I’ll just make a bra I can wear. I’m leaning towards making one I can wear.

Thoughtful Gift

 My hubby is very supportive of my bra-making journey. He was there when I would come home crying after trying on every bra in a store, and still not find one that fit. Then I found specialty stores, and how could a bra cost $150 or more? He has been there through it all. Although he couldn’t understand all the whys or hows, he witnessed it.

The first year I started making bras, my DH bought me the first Bra-Makers Manual for Christmas. The following Spring, he bought me the 2nd Manual. With my drafting underway, he just bought me a wonderful third resource:

 Such a thoughtful gift.

Happy creating!

A Few Alterations

~ Michelle ~ 6 Comments

My third bra draft was pretty good. In fact, it would have been wearable except I used water-soluble thread. That little fact alone would make it good for one wearing only. Well, the water-soluble thread and the fact that it was slapped together…

It fit pretty well. That’s what I’m really trying to say here.

There were only a couple of changes I still wanted to make to this. I wanted to add a bit to the underarm area for more coverage there – just a half-inch. I wanted to round the cups a touch at the apex. And I wanted to lower the bridge a half-inch as well.

Changes

While I was making those couple of changes I listed above, I decided to change the style of the bra too. I added a power bar. So  now it’s the same style as the Pin-up Girls Shelley pattern with a split lower cup and a power bar. Shelley has been my favorite pattern, so it only makes sense I make something like that. 

Making these changes were such much easier than the actual drafting of the cups. That was much more of a challenge.

 Leftovers

After soaking my bra, all the threads dissolved, and I was left with bits again. This is great as I can re-use most of these bits. It’s just the cups I need to cut fresh. I found the band too big as well, so have adjusted that. It’s all ready to go for a second sew. 

Stay tuned for my bra-drafting. I’m hoping only one more draft and I’m cutting into some gorgeous lace again.

Seize the Day

Remember how I couldn’t put a bow on Em’s Watson because she didn’t want to take it off once she’d tried it on? Well, I had my chance. The circumstances surrounding this? Well, I don’t want to know. I do know the bralette was on the floor and got stepped on… That was already more than I wanted to know.

It seems little plastic rings can’t withstand being stepped on. I had to repair the bra. I replaced the rings and sliders with metal ones from a little second-hand bra I bought. I also added the bow! I had no intention of missing that opportunity.

Happy creating!