A Few Alterations

August 26, 2017August 25, 2017 ~ Michelle ~ 6 Comments

My third bra draft was pretty good. In fact, it would have been wearable except I used water-soluble thread. That little fact alone would make it good for one wearing only. Well, the water-soluble thread and the fact that it was slapped together…

It fit pretty well. That’s what I’m really trying to say here.

There were only a couple of changes I still wanted to make to this. I wanted to add a bit to the underarm area for more coverage there – just a half-inch. I wanted to round the cups a touch at the apex. And I wanted to lower the bridge a half-inch as well.

Changes

While I was making those couple of changes I listed above, I decided to change the style of the bra too. I added a power bar. So now it’s the same style as the Pin-up Girls Shelley pattern with a split lower cup and a power bar. Shelley has been my favorite pattern, so it only makes sense I make something like that.

Making these changes were such much easier than the actual drafting of the cups. That was much more of a challenge.

Leftovers

After soaking my bra, all the threads dissolved, and I was left with bits again. This is great as I can re-use most of these bits. It’s just the cups I need to cut fresh. I found the band too big as well, so have adjusted that. It’s all ready to go for a second sew.

Stay tuned for my bra-drafting. I’m hoping only one more draft and I’m cutting into some gorgeous lace again.

Seize the Day

Remember how I couldn’t put a bow on Em’s Watson because she didn’t want to take it off once she’d tried it on? Well, I had my chance. The circumstances surrounding this? Well, I don’t want to know. I do know the bralette was on the floor and got stepped on… That was already more than I wanted to know.

It seems little plastic rings can’t withstand being stepped on. I had to repair the bra. I replaced the rings and sliders with metal ones from a little second-hand bra I bought. I also added the bow! I had no intention of missing that opportunity.

Happy creating!

A Third Bra Draft

August 19, 2017December 27, 2017 ~ Michelle ~ 6 Comments

My third bra draft really was a success!

A Few Differences

There were a few things I did differently this time. One of the changes I made was to use water-soluble thread – and it came in handy! I realized very quickly I had mis-measured my cradle for the elastics. A quick little soak in some water, and it was all bra bits again rather than a partially-sewn bra meaning I’d have to start over or unpick the whole thing.

I was not expecting to have a bra when I was done. I was simply seeing how my draft fit and what changes I needed to make. That is a very freeing feeling.

My Pattern

I made a diagonally seamed bra with a split lower cup. Nothing fancy for this bra – I only want to see the fit.

My ‘Kit’

The same attitude I had for the pattern, I had for the kit. Nothing fancy, just bits of this and bits of that. Not all the bits were even matching, but they worked for their purpose.

In this little pile of a kit, I have beige Duoplex and Power Net, some beige and some white bottom band elastic, white upper band elastic, white strap tape, and blue trim! I’m really not expecting this to look good.

As well there’s the YLI Wash-A-Way thread. If you haven’t tried it, it’s great! It works perfectly for testing a pattern like this.

A Hot Mess

Honestly, the sewing on the bra looks terrible. Well, not the sewing really. It’s more the techniques or lack there of. It’s a mis-match of colors, and I didn’t do a lot of the things I’d normally do to ‘neaten’ things up. Just look at the bottom band elastic.

Normally, I trim the elastic under the channeling – I like a thinner band running under the cups. Not this time. This time I’ve simply folded the channeling over the elastic and pushed it out of the way.

It’s looks so bad.

While we’re talking about the bottom band elastic, I used two colors because I didn’t have enough of one color to do the full band. I used a great technique of piecing together bits of elastic. I saw Monica Bravo do on a YouTube video. It’s quick and it really doesn’t show at all from the front. You can view the video here.

You can see I wasn’t trimming anything, not even threads. This was a quick sew to see how things were going to fit. That’s it.

Does It Fit?

I have to say I am so surprised by the outcome of this drafting experience. First off, I never thought I’d be drafting my own bra pattern from measurements!

Secondly, I made a very wearable bra! Well, it would be wearable if I hadn’t used the water-soluble thread! But it fits. There are a few tweaks I want to make, but it fits.

The whole time I was sewing this, I kept thinking how I’d never sewn/thrown a bra together like this. There are bits hanging or sticking out everywhere! The upper band elastic is hanging out of the side of the cup because I didn’t finish the straps; on the other side it’s hanging down the back at the hooks and eyes. The channeling is sticking out. It really is a mess to behold!

There’s not a top-stitch to be found, and barely a back-stitch present. I sewed it just enough to hold it together to try it on… well almost. I did pull on the strap a bit too much and pulled it off! I had a pin handy, so was able to continue in the trying-on/evaluating process.

Adjustments

There are only a couple of adjustments I want to make. I plan to add a little more coverage to the underarm area – probably a half-inch will do. I want to lower the bridge by about a half-inch as well. Rounding the apex and adding a power bar will complete this. I’ll also likely do another test run. Then I should have a perfectly fitting self-drafted bra and pattern. What a feeling!

Happy creating!

Rad Panel Undies Inspired Panties

May 20, 2017April 10, 2019 ~ Michelle

After my attempt at Rad Patterns’ Panel Undies, I decided I wasn’t going to try another pattern size. I was going back to my self-drafted pattern, and using it to make my own version of those adorable panties.

Inspiration

I do really think these are adorable. So they were my inspiration.

However, while I’m changing things up, there were a couple of other changes I decided to make.

Personal Preferences – First Change

As much as I love the side panel, I wasn’t sure I was going to love the seams in the back. So, I decided to leave those out. My panty pattern has the sides coming around to the front to give a similar look in the front, but a smooth back.

I’m still using the two tones of beige, although in the photos here the lighter tone looks off white. It’s not. They are closer in tone than the photo is showing.

Here’s the back of the panty with no seams. I think I’ll prefer no back seams for under clothes. That’s a sad baggy-looking bottom in the photo. Thankfully, I fill it out much more.

And on the left front seam, I added a little lace tab.

Personal Preferences – Second Change

Another change I made when making my own version was to use the ‘Burrito Method’ of enclosing the seams on the gusset. The Split Personality Undies do not have enclosed gusset seams. After making panties with an enclosed gusset, I just didn’t want to not do it.

A Second Pair

For my second pair, I made my basic self-drafted pattern. The one that is so similar to my former favorites, Kwik Sew 2286.

However, for this pair, I doubled the lace at the front and added a lace bow just for something a little different.

As well, this pair has a lace tab on the left hip.

For both of these pairs of panties, I used the pattern I drafted using Craftsy’s Sewing Panties: Construction & Fit! You can also find the same information in Beverly Johnson’s Make & Fit Panties booklet.

Happy creating!

Plans for Another Bra

April 9, 2017December 27, 2017 ~ Michelle ~ 2 Comments

I have to say, I really do love sewing bras. There is something very addicting about that little bit of lace, material, and elastic. I also have to say, I really loved making a bra from a pattern I drafted. When I made my first bra five years ago, I never thought I’d do this!

I was thinking now I have a pattern I love completely, and that fits so well, it’s time to get on with my Spring Wardrobe. However, I decided one more test bra first. I can always use another black bra.

Materials

For this bra, I chose some lovely black lace with red details. Along with that lace, I chose black duoplex and power net, but red elastics to make the red in the lace really pop.

This is one of the gorgeous laces I bought at Fabricland last year for $2.50/meter. Oh, I had fun stocking up on those laces.

Alterations

For this bra, I made the underarm smaller. I add 1/8-inch back to the bottom of the cradle as the thinned band under the cradle was a really tight sew last time. As well, I added 1/4-inch to the top of the cradle where the wire ends as it was just a touch short there.

You might be wondering how all these alterations worked out? Let’s take a look.

Here’s my newest bra from the front:

I really love the red elastics on the top and bottom of the band.

Here’s the side:

I’m asking the famous Mrs. Weaver for a bit of help again. The side of my bra is doing what this very pretty Empreinte Maya bra is doing. (Photo from Amazon.ca)

See how the bra pulls in at the wire line at the side? Mine is doing that, and I need to figure out what I need to adjust to make it not do that. Thank goodness for all the professional bra-makers out there!

And here’s the back of the bra:

It’s such a pretty bra! I love the lace and the red elastics. Looking at this photo of the back, I can see I need to trim those red elastics just a smidge more.

Lastly, here’s the bridge – I widened the bottom of it. You can see here with my navy bra beside it that it’s wider.

I need a little more room there, so this is much better.

I’m especially pleased with my sewing this week as I’d hurt my knee and all my sewing was left-footed sewing.

Happy creating!

P.S. You may want to read Just One More Stop at the Fabric Store.

Did you see Orange Lingerie has just published a new bra pattern? It’s lovely!

You can find the Fenway bra on Etsy.

Testing my Drafted Pattern

April 1, 2017April 10, 2017 ~ Michelle ~ 4 Comments

I’ve made my drafted pattern, but I want to check how it will fit before I sew up a bra.

Testing

There are a couple of ways I can test the fit before I start sewing up a whole bra. In Beverly’s Craftsy class, Foam, Lace & Beyond, she shows how to convert your Classic pattern from a diagonal seam to a horizontal seam. I did this to compare the two patterns because the original pattern I made from the draft was a horizontal seam.

It’s looking pretty good on paper and I’m feeling encouraged.

Alterations

Even though I’m encouraged by my pattern, I still want to make a tester cup. There are no alterations done to this basic pattern, and I have a list I usually need: make the underarm smaller, a flat spot adjustment, check the bridge height and bottom width. Then there are the Omega considerations. Making a test cup is simply one more confirmation for me.

This tester cup is looking good too.

Here’s the dart I pinched out. I’ll adjust the pattern and then it’s time to cut out a new bra! I’m going to adjust the strap and upper cup at the side too. You can see both in the photo below.

A Trial Bra

My sewing was going along nice and smoothly, and then a tiny snag. I pulled the elastic out of the finding kit and it was the ‘old’ elastic. There’s been a change in elastics and the newer one is 20% less stretchy. It’s a good thing the Fairy Bra Mother blogs. I went over to Beverly’s blog and used her information to take out that extra width I’d added to my band. You can read her post here.

I not only looked that up, but also her post on sewing a Gothic Arch because it’s such a comfortable alteration.

New Bra

Here’s my new bra. It fits so well, and I’m so excited about it! I think I’m more excited about this bra than any bra I’ve made in the past.

Here’s the side view. You can see there are a couple of little alterations I want to make.

The pin there? I want to take a little more out from the underarm there. As well, I’ll want to raise the side there 1/4-inch. The wire is coming to the top of the elastic, that’s why I didn’t finish it there.

The back is fine. Taking out that 20% makes it fit perfectly.

Here’s the Gothic arch I added. It is such a comfortable pattern alteration.

All in all, I’m thrilled with my new bra, and the drafting experience.

Happy creating!

P.S. You may want to look at A Review of Sewing Bras: Foam, Lace & Beyond.

Patterns

March 24, 2017December 27, 2017 ~ Michelle ~ 2 Comments

After working on drafting a bra from measurements, my work wasn’t done with the draft. The next step is to use that draft and make a pattern. Let me show you a little of the progression so far.

Drafting

Here’s the draft. It doesn’t look anything like the pieces I’ve seen in bra patterns.

Horizontal Seam

Then, a few more steps and things start to look more familiar. Beverly takes you through it all in her manual. Take a look at these pieces. These actually look like bra pattern pieces.

I’m not the biggest fan of a horizontal seams. I used one when I made my Heather bra.

Common Bra Seams

Here are some different seams shown in bras (photos are from Bra-Makers Supply and Sewy):

Vertical Seam

I’ve also tried the vertical seam when I made KS 3300. Once I started making my own patterns from the draft, I had to try each pattern. This part of the process was definitely fun for me. The photo of the vertical seam is from the Sewy website. It’s their Linda bra pattern.

Diagonal Seam

My favorite seam in bra-making so far has been the diagonal seam. That’s the bottom left in the photo collage above. A diagonal seam is what we find in the Classic pattern or the Shelley pattern from Pin-Up Girls patterns.

I also love the power bar and split lower cup on the Shelley. Here are a few of my favorites from that pattern.

I love this pattern, and know I will make it using my drafted pattern!

Curved Seam

The one I really wanted to try was the curved seam. All the gorgeous Cloth Habit Harriet bras I’m seeing were making me want to buy that pattern too. I had to be very strict with myself not to buy yet another pattern I have. The photo in the first collage is from Sewy again. It’s their Isabell pattern, which I have. I also have a clone of a Fantasie bra that is a curved seam too. I didn’t need one more pattern, but I was tempted! However, I did want to make one when I was making the patterns.

Patterns I Made

Here are all my new patterns. I just need to add seam allowances to some of them, and make little changes like adjusting for a flat spot, thinning the band under the cradle, and lowering the bridge.

I also drafted my a new cradle and band.

Happy Creating!

P.S. You may also be interested in Sewing Bras: Foam Lace & Beyond.

Here’s some exciting news.

Merckwaerdigh

The news is from Merckwaerdigh’s Etsy shop. Here’s what Margreet said in her post on Facebook: “SPRING … a perfect time for a major change! As of today all listings in the Merckwaerdigh shop at Etsy are FREE SHIPPING!!!“

She is raising her cost a bit, but what she is adding to the costs will still be lower than shipping costs! Yay!

Attempting a Draft

March 4, 2017December 27, 2017 ~ Michelle ~ 6 Comments

I was going to make a Valentine’s bra for myself. I had everything set out and was getting ready to cut it out. I even knew the one alteration I wanted to make.

Still using my Pin-Up Girls Shelley pattern, I was going to add a little bit of width to the bottom of the bridge.

Right there. I want it just a touch wider, but everything else fits really well. In fact, it’s my current favorite.

However, much like making my Personal Croquis (which I’m still really enjoying), I’ve had another project on my list of things to do for a while now – draft my own bra pattern.

Resources

I have Bra Design & Draft from Beverly Johnson’s Bra-making Manuals.

In fact, I’ve drafted part of my pattern already. The only part of the drafting process that is new to me is the cup. Because of the alterations I’ve needed for my cradle and bridge, I’ve been drafting my own cradle/bridge for a few years now using information from the Manuals.

Even though only part of this process is new, it still felt daunting. I figured the worst case scenario was it wouldn’t turn out, and I’d go back and use my Shelley pattern making that one little adjustment. The best case scenario would be I’d have a self-drafted pattern. I took a deep breath, and started.

Beginnings

I was geared up to start. I had my paper, pencil and eraser and thought I was all ready. I drew two lines, and then searched the house for a compass. Even my hubby got in on the search. Nope. We didn’t have a compass anymore. Our kiddos are done school, and we didn’t keep any of those school goodies. (I love to declutter!) So, it’s a quick trip to Staples, and now I’m ready again.

From here, I did what I usually do. I decided it wasn’t just right, so I crumpled it up and started again. I did this when making my bodice sloper too. My sloper was fine, and so was this. But I like things just so, and I don’t mind making sure.

The next step felt like going back to the beginning. I hadn’t drawn out the cradle and band this time. But I needed those before I could say the cup fit. So, re-drew my cradle.

Third Time’s a Charm

I was happily getting started on my band and cradle, and realized I didn’t have all my measurements! I was drafting away thinking I was doing better than I anticipated, and everything came to a stop. I needed measurements which I couldn’t do on my own. I’d never drafted the band part, so didn’t have those back measurements. My hubby to the rescue.

Sigh

There was one more bump in the road. I got to a point with the drafting and mine didn’t look like what Beverly had in the Manual. It really didn’t look the same, but I knew all my measurements were correct. I was stuck. You can see how I was feeling even. No sparkly stars shining perfection on my draft!

I am so fortunate to have worked on a blog tour with The Fairy Bra Mother and Mrs. Weaver. In fact, I’ve worked on a few projects with Mrs. Weaver. I’d mentioned to Mrs. Weaver that I was attempting a draft. She very kindly offered to help if I got stuck. I took her up on that.

It turns out I was on the right track; it’s just much easier to see what the next step was rather than read it. Thank you so much, Karin!

Next Steps (Finally!)

Here’s my newly drafted pattern from my measurements. I won’t sew this up as it is. I’ll change the lines – add a power bar, split the lower cup – add a few of the pretty details I like in a pattern. Once I make it more a style I want, I’ll make a test bra to see how it all fits.

Happy creating!

Navy Panties

December 17, 2016December 27, 2017 ~ Michelle

I made some panties to go with my new bra. I used my self-drafted panty pattern from Beverly Johnson’s Sewing Panties: Construction & Fit class.

I have to say, the only thing I like better than making my own panties, and making matching panties, is making them from a pattern I drafted myself. That is the best panty-making experience. Ever.

These are indigo cotton Lycra from Bra-Makers Supply and navy stretch lace trim from Frog Feathers on Etsy. I had hoped to use the same lace I used on for the bra for the whole front panel of the panties, but this lace isn’t a stretch lace. No stretch, no front lace panel. So, I’ll save my lace for future bras and just use little bits of the left over lace to embellish my panties. Like this partial rosette on the hip shown below.

Here is my set together:

I’m really happy with this. The navy may become my new ‘black’, or at least they will until I make myself a new black set.

Do you remember I mentioned a nasty little sharp spot on the hooks and eyes? Linda Crawford, a profession bra-maker in Ontario, Canada (Linda was part of our Canada Cups tour) shared this tidbit with me on how to fix that problem:

“What I do to help with those sharp edges on the hook and eye is I put a piece of cut and sew foam under the eyes, and tiny zigzag all round the edges, then trim it so there is 1/8″ – 1/4″ left. It helps stop that scratch and it is comfy too!”

Thanks, Linda! That’s a great idea.

Back to my panties. These panties are very similar to an old favorite of mine – a pair of La Vie En Rose panties that were discontinued. I loved those. They are also similar to another favorite. Kwik Sew 2286.

After I drafted my panty pattern, I started looking for more panty-making resources. One can’t have too many resources! It wasn’t long after I took Beverly’s class that Margreet, the owner of Merckwaerdigh on Etsy, brought out her own Mini Panty course to design your own panties. One of the things I love in this mini course is how Margreet shows the original master pattern in her sketches and then the altered one. I really like seeing both images together. It’s helps me understand the changes. A comment I recently read on one of the bra-making forums on Facebook had this to say about Margreet’s designs: “The brains behind Merckwaerdigh has a talent for making the female form look exceptional.” I agree!

Here’s a video glimpse into her course from the Merckwaerdigh Facebook page (used with permission):

It’s a great mini course, and Margreet’s designs really are lovely!

As much as I wanted to make a second pair of panties to go with my new bra, I’ve had to work on some sewing for gifts. That second pair will have to wait.

Happy creating!

A Craftsy Review: Design & Sew an A-Line Skirt

November 20, 2016December 27, 2017 ~ Michelle ~ 6 Comments

I have a lot of Craftsy classes, and I know I’m not alone in that. In fact, I know two other bloggers who also have a lot of classes, and we’re teaming up to post monthly (we hope) reviews of the classes we’ve taken.

Reviewing along with me are Marsha of Flying by the Seam of my Pants and Naomi of Barely Beige. Marsha and I have done a few blog tours together now, so I think you’ll all recognize her. Naomi is just getting started. I hope you pop over and read both of their reviews, and please make Naomi feel welcome .

craftsy-script-with-magnifying-glass-2

Now, let me share with you our real motive behind our plan to do these monthly class reviews – it’s to really watch all of these wonderful classes we’ve bought, and really get the most from them; you know – do the projects, make the wonderful makes, and not just have a lovely Craftsy class collection (as wonderful as that would be on its own). Is there anyone else out there who has classes they haven’t watched yet? I’m so guilty, but don’t tell my hubby!

So, for our first review we’re covering Design & Sew an A-Line Skirt, which was one of my first Craftsy classes.

design-sew

Of all the classes I’ve taken on Craftsy, this will probably be the hardest one for me to review. The reason for that is I’d like to just say great things about this class, or any class. It’s a little harder for this class to do that. Here are my first thoughts on the class from a couple of years ago. And here are a few more thoughts from that time.

However, I like to focus on positives, so I’ll share some really good things about the class now. Let’s cover those first.

One thing I like about this class.

One of the things I really like about this class is it taught me to put in an invisible zipper for the first time. I’d avoided them until this point. A regular zipper was fine, but I had been too intimidated to even try an invisible one. Just the name itself had scared me off.

Deborah’s instructions were very clear on how to install the zipper and I had no trouble. Her instructions were great really.

Here’s an old photo showing the zipper. (Sorry for these terrible photos – I was having camera trouble back then.)

invisible zipper

That zipper is about as perfect as a zipper can get. That’s a great aspect to the class.

I made a skirt that fit.

I did finish my skirt. That’s another positive for the class. Not only did I finish the skirt, but it fit as well. Here’s another (terrible) old photo. skirt

A personal dislike.

The skirt we make in this class sits a couple of inches below the natural waist, and I don’t love that. That’s simply a style preference.

Positive reviews with cautions.

This class is rated for beginners. It has reviews from 87 people and they have given it a 4.5 out of 5 stars. That’s pretty positive. However, there are comments in those reviews questioning whether this is really a class for beginners.

Maybe not for beginners.

The reason reviewers are saying this class isn’t for beginners is this instructor wasn’t answering questions. The fact that so many don’t receive answers makes me think this class might be better suited to someone with more sewing experience.

I had the experience of not having my questions answered when I ran into a bit of trouble. With this class, I made my first sloper. I’d had no previous experience with slopers.

square-up

Here’s a screen shot from the Craftsy class showing Deborah squaring up the pattern she’s making. This was the first area where I had trouble – ‘squaring up’.

My sloper was so curvy (like me) that squaring it was rather hard. I asked my question and didn’t receive an answer. I decided to simply move ahead even though my sloper wasn’t perfectly squared up. I did run into more trouble, and again didn’t have an answer to my question.

I contacted Craftsy about not getting answers.

Craftsy customer service.

ccs

Have any of you had any experience in dealing with Craftsy when a problem comes up? Craftsy is great! They have phenomenal customer service, and they came through for me with my unanswered questions.

When I emailed Craftsy with my frustrations over not having my questions answered, Craftsy checked and confirmed I did in fact have unanswered questions. Then made things right for me. That made me a happier customer. I still didn’t have answers to my questions though, which left a bit of a negative feeling about the class. That’s why this class review is a bit of a struggle. I have some negative feelings about this class.

However, to be fair, there are a few really great aspects to this class. So again, let’s focus on these:

I drafted and made a skirt that fit me.
I installed my first invisible zipper (and it looks great)!
There are a lot of positive reviews for the class.
With this class you make a modern A-Line skirt.

I think if you’re a competent sewer, there would be a lot you could learn from this class. So despite a bit of a negative experience, I, along with many of the other class reviewers, will recommend this class with a caution – it’s not for beginners.

I will let you know, we decided to start with our reviews but are taking December off. We’ll pick this up again in January. So no review in December.

Happy creating!

Great Timing!

October 31, 2016December 27, 2017 ~ Michelle ~ 2 Comments

No tricks today, but hopefully a treat.

I have both of the Bra-Makers Manuals. I have Demystifying Bra Fitting and Construction. I have Bare Essentials: Bras – Second Edition: Construction and Pattern Drafting in Lingerie Design. I’ve taken a few books out of the library as well – like Patternmaking for Underwear Design: 2nd Edition.

bra-drafting

I’ve been reading about drafting my own pattern for a while and decided it was time to take the jump. I started with the instructions in the Bra-Makers Manual Vol 2. I’ve used part of this already to draft my own cradle and band to help fit my Omega shape and had no trouble with it. So, I thought it was time I tried drafting my own pattern.

I did run into a bump drafting and sent off an email to Bra-Makers Supply. It turns out, the information from the manual had been updated, and that new information would take care of my question.

Now, with updated information in hand, I was ready to start again.

Just as I was about to start, there was another very timely post on Facebook. I love the sewing/bra-making forums on Facebook. They are a wealth of information!

untitled