Marlborough bra pattern

Booby Traps’ Dart Pattern and The Bra-A-Week Challenge

~ Michelle ~ 8 Comments

Recently I saw a Booby Traps pattern for sale and thought it was quite nice. There are some similarities to the Pin-Up Girls Classic pattern from what I could see – a lace upper cup and an one-piece lower cup.

btd

Seeing as I have a bit of a pattern addiction, I was thinking of picking one up. This one was a private sale, and not my size, so I went to visit their web site. After looking at the patterns, I checked to see if they shipped internationally. On the FAQ page it says:

“Where do you ship to?

We ship within Australia and to New Zealand. 

Shipping outside these Countries is currently not available. “

Hmm. I’m never one to be deterred when I want something, so I sent them an email and asked if they mailed their patterns to Canada. The answer I got was: ‘Yes’. Great!

When I was sending off my initial email, I thought I’d throw out a hopeful idea just in case they didn’t post to Canada – I asked if they were going to introduce PDF patterns. Another yes! In fact, it was only weeks away at the time. That’s even better than shipping to Canada! For almost the same price I’d spend to buy a pattern and have it shipped, I could buy two PDF patterns.

I know. I said I don’t like PDF patterns, but a bra pattern is different. I’m not dealing with large pattern pieces, and there’s not usually much taping involved. I’m okay with a PDF bra pattern. However, I did just see a brilliant post by Sigrid on how to use a PDF pattern and not have to deal with a bunch of taping. You can read about it on her blog here. It’s really brilliant. I just may love PDF patterns again.

Back to bra patterns. The B003 wasn’t the pattern I chose to try. I chose the Dart bra.

dee_19714_products_hi_res_364_-_copy_3_2

20150529_104101_1

Isn’t that a beautiful bra? I love that lace in the second photo. It’s just incredible.

So, the first thing I had to do with my Dart bra pattern was grade it up. I’ve graded other patterns up, so that wasn’t too hard. The next thing was to make adjustments to the pattern to fit an Omega shape. Sigh. That’s harder. The good news there is I have lots of experience! A few years of it, in fact.

take-two-lots-of-pining

There are a lot of darts that aren’t part of the original pattern in this photo. The good thing about trying a test cup on over an existing bra is the wire line is there and the correct shape for me. That really helps me know where to take a little more away from the outside of the pattern.

After the third set of alterations, I was beginning to wonder if this bra will work for me. Then some inspiration hit. I’d make a pattern from my Shelley pattern that fits; I’d make it out of cut-and-sew foam and then just put a dart in it.

Comparison

Well, that didn’t work either.

I’m not one to give up easily, so, I even-more-carefully-than-the-first-time re-drew the graded-up pattern. That’s when I took a few minutes to play with my pup and got bit. Yup. Same hand I’ve been trying to get better now has one more hurting spot.  Did I sigh already?

I sewed up the cup (at this point, I think I was on tester cup six), and it looked good. I was ready to cut into my good lace.

looks-pretty-good

always-too-big-under-the-ar

I’m also hoping that the extra material there under the arm will be taken away with the elastic and gathering that is done there. That’s one area that’s always too big for me on patterns. I’d already put a dart in the pattern there, so didn’t want to shorten it anymore.

So, how is my Dart bra doing? Well, I’ll show you how far I got.

lace-not-long-enough

I tried three different non-stretch laces. This is my widest non-stretch lace. I don’t have a lace that will work for this pattern… in my size. I thought about aligning the upper edge of the cup with the top scallop of the lace rather than the bottom, but this cup was already going to sit low on me. Still not quite ready to give up, I checked Bra-Makers Supply and they only carry 5″ or 6″ non-stretch lace. I checked Etsy, but not much there – I found two. I didn’t love either of them.  I have to admit defeat – at least for now.

I think I’ll pack this pattern away. The only sewing accomplishment I’ve had this week was to put some flexible wires into some bras I’d made before, and now they’ll go from my to-be-repaired pile back into my lingerie drawer.

bras-with-new-wires

Let’s put my sewing week behind us and move onto the Bra-A-Week challenge! This is my last week hosting the challenge. I’ve had so much fun seeing all the incredible bras and lingerie being made by such talented creative people. Next week the challenge will be back in the hands of the ever-so-talented and capable Emerald Erin!

Our first submission comes from Amber. Amber made a Pin-Up-Girls with a downward hike, and the front made to look like a demi bra following instructions in Bra Makers Manual. She also added a nursing sling made from 15 denier- which she said she would not do again!

Amber-bra-and-panty

And the upper cup is white duoplex, that has been printed with a rubber stamp and fabric markers. What a great idea! It’s so pretty.

Amber-bra

Isn’t that lovely? That makes me want to go out and buy fabric markers and stamps, Amber. Amber’s panties are drafted from Beverly Johnson’s Make and Fit Panties. What a lovely set, Amber.

Our next submission comes from Maddy. Maddy made a yellow lace Marlborough for her sister for her birthday. She says it fits her so well and she was super happy with it! Maddy was also pleased with the finish – she covered the side seams with left over underwire channeling to make everything clean and tidy. I know how that feels. There’s just something to making it as pretty on the inside as it can possibly be. That is so pretty, Maddy.

yellow-bra

Next from Maddy still is a pair of Ohhh Lulu Alice tap pants. Maddy bought a gorgeous torsolette a while ago, and although she loves it, couldn’t  justify buying the matching underwear. So she made my own! The colour match is almost perfect, and they’re actually super practical for wearing over the suspender straps.

tap-pants

Gorgeous, Maddy! You’ll have to subscribe to read about these on Maddy’s blog, Miss Maddy Sews, as she hasn’t posted about them yet. If you go right away, you might still be able to enter her give-away!

Happy creating!

Butterick 6031 and The Bra-A-Week Challenge

~ Michelle ~ 12 Comments

Have you seen any of the Patterns by Gertie? She has some lovely patterns, and her Butterick 6031 is one of my favorites in my lingerie pattern stash… and it was time to pull it out.

butterick-6031-w

It is so pretty! I love that slip – black and white – such a classic!

Another admission I must make is I love watching The Shopping Channel. There are many Today’s Showstopper items in my house. This camisole was something I found on their website and was an inspiration for me. This, as well as some gorgeous material a friend sent me. The photo is the Rhonda Shear Leopard Lace Cami.

comparison-w

I saw this and loved it, but I wanted something a little looser. I have a favorite camisole, and it’s not a snug fit, so I wanted one more like the one I have. That leopard lace? Love! Yes, it was time to pull out the leopard mesh I have in my stash and make something with it. Adding lace just makes it perfect.

Here’s my B6031 camisole.

Cami

Love, love, love. However, I did have a bump along the way. I’m still trying to figure out what happened. Somehow, after cutting the mesh material for the cups, I ended up with two right cups. Excuse me? I’m completely baffled by this. I really have no idea how I cut out two the same, but I did.

right-cups

That was upsetting. I didn’t want to waste any of the material. I will be able to use the material to make a Shelley though, so I’ll save it for future right and left cup pieces. I wasn’t alone this week though, I was reading on another blog how the blogger cut out two left sides of her top.

To make the camisole I also had to do a Full Bust Adjustment. I’ve done one before when I made my moulage from Suzy Furer‘s class on Craftsy: Patternmaking Basics: The Bodice Sloper.

However, this time I used the information on the sew-along from Gertie herself to adjust my pattern following her instructions. I’m glad I did. The instructions I have would have had me add 3/4″ more than I added. The 1″ Gertie suggested was perfect.

I decided I’d follow along on the sew-along, and the funny thing about following along is once I got started sewing, I forgot about following. I was 3/4s done and remembered. I went back and read through it just to see what it said. The sew-along is for a slip, but all but the hem treatment is exactly the same as for the camisole. I’m thinking of trying the panties from this pattern too. They look really cute and are similar to my favorite TNT Kwik Sew 2286.

I also had some fun making my own bows again. I often like to find some way to do something different or unique. I did that with my bows. The first bow shown here has some mesh with the ribbon, and they’re both tied into the bow, the second bow is ribbon tied with the mess, and the mesh tails hanging down. Both were so fun to make.

Front-bow

Strap-Bow

The materials I used came from BMS (power net), Frog Feathers (lace), and a dear friend, who just happens to be in our Challenge this week, (leopard mesh). Thank you, Ginny! I love how beautiful my camisole is, and will treasure it even more because the material was a gift.

Now onto the Bra-A-Week Challenge. This week we’re on week 29 and we have a great week!

Our first submission comes from Karin of Mrs. Weaver’s Finest Unmentionables.

untitled

This is the Marrakech bikini. It’s based on the Rebecca bikini from the 3 Sisters pattern, a Pin-Up Girls pattern. Karin altered it to make the cups a little more flattering. The back detail is gorgeous and the fabric amazing!

untitled (2)

That is gorgeous! You can read more about this beautiful bikini on Mrs. Weaver’s blog.

Our next submission comes from Amber. Amber made this beautiful bra for her friend, Helena. She started a while ago, but got interrupted in her sewing by having a son. Congratulations on your son, Amber!

untitled-(3)

Amber started out planning to make a basic bra, but then saw this lace and wanted to try a couple of different techniques.

untitled-(5)

Look at that starburst. So very pretty! This is the Pin-Up Girls Amanda foam cup pattern. The pattern, fabric and notions – except for the lace are from Bra Makers Supply or BWear. It’s beautiful, Amber!

Next we have a beautiful bra from Maddy.

Maddy made her third Marlborough with matching Ohhh Lulu tap pants, in coral lace.

img_1670

img_1674

Maddy says, ‘I love this set so much! The fit is lovely and comfortable, and I’m so in love with the lace (and its remnant price tag!)’

I agree with Maddy on that – it’s lovely! And beautiful remnant always feels better than full price. It’s gorgeous! You can read more about Maddy’s Marlborough on her blog, Miss Maddy Sews.

Next we have a beautiful bra by Sofia.

Sofia made a very lacy bra. Is there anything more delicate looking than an all lace bra? She also made a few alterations to her pattern. You can read about that on her blog, Silver Lining.

Lacy-bra

Beautiful. That bow really looks awesome, Sofia! Sofia made her own bow for this bra. It really pops with that deep color.

Our next submission comes from Ginny. Ginny made the Boylston Bra, the newest pattern from Orange Lingerie, and she made it for her niece.

bcu

Oh, that is pretty. Ginny describes the Boylston as ‘a sleek balconette style with self fabric straps’.

Ginny also made some matching panties for her niece. Here is Ginny’s first set featuring Make Bra’s DL21 panties.

bs2

That is lovely. Ginny, your niece will love it! Here’s Ginny’s second set now featuring Ohhh Lulu’s ‘super comfy’ Grace panty.

bs3

I love that floral lace on the sides! You can read Ginny’s guest post on Sewcialists‘ blog.

Our final submission for the week is from David.

David front

David made this bra with pink cups with black lace. The upper part of bra cups are made with black embroidery on tulle.

David side

This bra has a double strapy back and a neck strap.

David back

David is a free-lance lingerie designer. This is really beautiful.

Happy creating!

Matching Panties for A Modern Floral Shelley and The Bra-A-Week Challenge

~ Michelle ~ 16 Comments

This week I have a couple of pair of panties I made to co-ordinate with my Modern Floral Shelley.

I love cotton, and this Indigo cotton spandex is from Bra-Makers Supply. The lace is from the Merckwaerdigh kit I used for the bra, and the elastics are from Frog Feathers on Etsy.

2 panties

On the first pair I made I used a bit of the lace I used from the bra and then some Ivory lace elastics – Ivory also being a color also in the Lycra. I’d wondered if maybe there was too much lace, but then decided there can never be too much lace. I love them. They’re so comfortable.

Too much lace

The second pair, which is my favorite style to make, uses the same lace from the kit for the whole front panel. On this pair I used Navy lace elastics.

Fav style of panties

Both pairs of panties are from my TNT panty pattern – Kwik Sew 2286, which I have fun with by changing the lines or style, but using the pattern as a base or starting point.

I also picked up a couple of pair of panties in some coordinating colors, not so much because I wanted or needed the panties, but to clone them for patterns. I really like the top pair – how the back part of the panty wraps right around the front in a little V across the hip, and the lace elastic in the design. Very pretty. The bottom pair is simply a high cut style, but still fun.

RTW

Now our Bra-A-Week Challenge. We’re on week 26 of the Challenge! It is so very inspiring to see everyone’s submissions.

This week we have a beautiful bikini from Diana.

WK26Diana

That is so lovely. Diana wrote about this on her blog poetsie.blogspot.nl. If you don’t read Dutch, it helps to open it in Google Translate. You can read it that way in your own language. Check it out here for English.

This is so colorful and fun. It’s really lovely, Diana.

Our next submission comes from Maddy.

img_1570

Maddy made the Marlborough bra. This is her second time making the Marlborough; she made a few modification to the pattern and got an almost perfect fit. That perfect fit (or almost perfect) feels so good!

Maddy also mad a matching pair of Ohhh Lulu Grace panties.

img_1581-e1435650089567

This was Maddy’s first time making the Grace panties, and she really loves the style and fit! That is so good to know because the Grace panties are on my to-buy list. Thanks for recommending them, Maddy!

You can read all about Maddy’s Marlborough and Grace panties, with more pictures and details about the alterations on her blog:  https://missmaddysews.wordpress.com/2015/07/09/something-wicked-this-way-comes/
Our next submission comes from Monserratt. Monserratt is a Pin-Up Girl like me, and made her bra from the Classic pattern.

stardust front

I love these colors! So gorgeous! You really need to see take a look at Monserratt’s blog: https://monserrattlopez.wordpress.com/2015/07/11/we-are-stardust-bra/ – she has a lot of information on there as to what she’s done in the way of alterations, but also a lot of photos. You can see her lovely makes, and her great photos!
stardust back
Love that blue and gold! So very pretty.
Our next submission comes from David.
Zdj cie0475
 David’s bra features black lace across the front overlaid with the straps. This is something like a short corset, bandeau, sport bra and strappy.
Zdj cie0477
 But there are two different laces used here. You can see the second lace on the back.
Zdj cie0480
 Isn’t that stunning? Just gorgeous. David is a freelance lingerie designer, his label is: Bonnet Bleu
Our last submission is from Erin!
Erin made this is a bikini for her sister’s birthday.
IMG_2400
 Erin’s sister picked out this fabric and wanted a cute itsy-bitsy bikini, but with a little more structure (underwires & foam). It’s a vertical seam cup, low cut with short wires. (Erin thinks she’s the equivalent of a 34C although she drafted this pattern off her measurements).
IMG_2389
 The details are a cute tie in the front and on the sides of the bottoms and nice double stitching on the outer fabric for the cups, gold rings and G-hooks. Erin said it was lots of fun to make – and hopes it fits her sister perfectly!!
What a nice birthday gift! You can read more on Erin’s blog: http://emeralderin.blogspot.ca.
I’m loving summer hosting the challenge – it is so exciting and fun to see all the makes coming in!
Happy creating!

Pattern Preferences

~ Michelle ~ 10 Comments

I’ve had a number of people ask me which I prefer, the Sewy Rebecca or the Pin-Up Girls Shelley. The Rebecca was published before the Shelley. I had also sewn the Rebecca pattern a couple of times before the Shelley pattern even came out, so was used to that pattern before I even tried the Shelley.

In fact, it was the Rebecca pattern I made for the Sew-Along hosted by Amy of Cloth Habit. It was during that time – when the Sew-Along was happening – that news of the Shelley pattern came out. I loved the Pin-Up Girls Classic pattern, and have both of Beverly’s Bra-Making Manuals, so was excited about a new pattern from her.

Over the years, I’ve had people email me and ask me which bra I prefer. And honestly, I had a hard time deciding which bra I did prefer.

The Sewy Rebecca pattern consists of a three-part cup: the upper cup, lower cup and power bar. This photo of the Rebecca pattern is taken from the Sewy website.

tzrebeccaotgr_z3

The Pin-Up Girls Shelley is a four-part cup consisting of the upper cup, split lower cup, and power bar. This photo of the Shelley pattern is from the Bra-Makers Supply website.

PB-3230%20Shelley

The two bras really are similar in design. One big difference is the Sewy Rebecca is fully lined inside the cup, and that really makes it look so professionally finished on the inside – something I love.

However, I’ve made a couple of Shelley bras now and lined them on the inside making them look as professionally finished as the Rebecca always does.

My most recent bra that I made was a Pink and Ivory Rebecca and while wearing it, I realized, for my shape I prefer… the Shelley.

So, what finally made me prefer one pattern over the other? Well,…

I have read many comments on blogs, bra-sewing forums, and personal emails to me where people have expressed their thoughts on another bra – the Marlborough by Orange Lingerie.

I know sewers who love this pattern. It’s their TNT pattern that they go to every time. I haven’t personally made up the Marlborough, so can’t say anything from personal experience. One of the reasons I haven’t made it up is I’ve heard it has a shallower fit. Another reason is I’m outside the bra’s  size range. I can play around with sister sizing and grading to get the right size for me, but hearing the bra fit more shallowly has been the one factor making me hesitate to try the bra. Although I must say, I’ve seen so many beautiful examples of the Marlborough sewn up and they all look lovely. I don’t think it’s the right pattern for me.

After wearing the Rebecca, I’ve realized there’s a shallowness to the fit of it as well. Although the two patterns, Rebecca and Shelley, are very similar, they don’t fit the same on me.

The Pin-Up Girls Shelley bra pattern gives me a nice shape and lift. The Rebecca pattern does not give me the same nice shape. Even though the patterns measure pretty much the same – the cross cup seam is the same length, and the bottom cup depth is the same, the upper cup is shallower on the Rebecca. I even added 1/4″ to it, but it still just didn’t give me the shaping I want.

Happy creating!

A Marathon of Muslins

~ Michelle ~ 4 Comments

I was so excited to finally have a bra that fit with the bridge going all the way back that I made a whole bunch of bra muslins to try on over that bra. I went through almost all of my patterns – there are a few that I likely won’t ever make – and I sewed up muslins for test fittings.

This first bra muslin I made was a brand new pattern just released. It was Orange Lingerie’s new pattern, the Marlborough pattern.

Marlborough

You can see here the fit looks like it will be really close and I won’t have to do very much in the way of alterations. The Marlborough doesn’t actually list my size in the size range, but I know all about finding the right size by the wire size. So using my ever-so-used BMM chart, I found the correct cup size to fit into my band.

Great! I marked the muslin where I’d need to reduce it a bit at the bottom where it overlaps the seam allowance on the actual bra, and pinned it to the pattern for when I’m ready to tackle making this bra.

Shelley

Next it was the Pin-Up Girls Shelley pattern. Again, the depth looks good, but it’s not perfect. I marked where the seam lines fell under the muslin, and I marked these right on the muslin. It’s now pinned to the pattern and ready for the alteration stage as well.

After Shelley, I did the Pin-Up Girls classic pattern.

PUG Classic

You can see I also wrote the pattern name and size on the muslin.

After I finished with my Pin-Up Girls, it was time to try a few of Merckwaerdigh’s patterns. This is where I had to do a re-do.

BHST2 B too small

I started with BHST2, but you can see the cup is too small in this size for me. It just won’t meet all those seam lines under it. I quickly traced off the next size up and that one was fine.

BHST2 B

This one gives me all the depth I need, and I’ll alter the pattern to fit my shape. Again, I marked on the muslin what changes I’ll have to make and pinned it to the pattern.

For some reason I didn’t trace of the CUPL-16 pattern I have. I must admit I was running out of steam by this point.

I did trace off my Sewy Rebecca. I wasn’t sure about the size,  and the size I chose was actually too big. So my next muslin of this will be smaller.

Sewy R 1

You can see here the cup is clearly too big.

I was really tired after all this, but have a great place to tackle each of these bras now – one at a time.

Happy creating!

One More Fantasie Clone

~ Michelle

I was so close on that last bra. And at this point, I do have a drawer full of bras I can wear that mostly fit. But I must admit, I am like a dog with a bone when I want to figuring something out – and getting that perfect fit is my objective.

I’d recently read something very encouraging from Annele, the founder of MakeBra said:

“An older lady, who was running her own lingerie business only few years ago, told me that you need at least twenty test fitting sessions before the bra pattern is ready to go.”

You can read about it here. Oh, that was such a relief to read. Then I’m not obsessed, or a terrible sewer. Whew!

Thankfully, at one time I’d bought the same Fantasie bra, but one size bigger. I think it was one size bigger. For example, what would be the size difference between a 34D and a 34DD? The only charts I have are from Bra Makers Supply, and they don’t do the double letters.

Back to the bra. I’d cloned it, and then after wearing it for a little while, gave it to a friend because I found it a bit loose in the upper cup. However, I was thinking this size would be perfect  with the firmer Duoplex material. All the materials are from Bra Makers Supply.

100_2410

Here it is. I think it shows the cups are a little fuller than the last bra. And just because the cups are fuller, it doesn’t show here how the bridge is really narrow at the top. The channeling and wires completely overlap at the top of the bridge. And the bridge goes all the way back!

As much as I loved the thin ribbon on the original Fantasie Vivienne, I couldn’t find anything in a beige or tan, only white. So I went with some bows I had for this bra.

100_2424

Here is a picture from the inside to show the wires and channeling overlapping at the top. It’s a bit tricky to sew this. What I do is sew the first channel down completely, and then the second channel is only sew down completely at the top and on the inside seam.

On the outside seam where the channeling pieces are overlapping, I do not sew it completely. There’s only maybe 2 cm opening where it is not sewn on the outside of the channeling. It has to be left open on the outside there so the wire can slide through that lower channeling.

On the top piece of channeling, I sew up to the outer seam line on the lower channeling, and it makes an attractive inverted V-shape in the stitching on the front of the bridge.

100_2431

And here is the back. I reduced this to make it a 2 hooks and eyes set again. This is how the original RTW bra came, so I wanted to do that again. It’s a wonderfully comfortable bra – and the bridge goes all the way back except for a tiny bit at the very top after I’ve been wearing it for a bit. It looks like I’ll be shortening my wires by 1/4″. But at least I’ll still have a full bridge.

Now I have a pattern that really works for me, the next thing I want to do is to take this pattern and use it to figure out what size I’d want to make in all my other patterns – the Sewy Rebecca, and the Pin-Up Girls Shelley and Classic, and the Merckwaerdigh E-BHST2 and E-CUPL 16.

And now I have one more pattern in my collection to try – Norma from Orange Lingerie just released a bra pattern! The Marlborough bra pattern. You can find the pattern at Orange Lingerie’s Etsy shop.

Happy creating!