A Second Blushing Addition

This is another short and sweet post.

I like to make a second pair of panties for every bra I make. And I didn’t have time to make a second pair to go with my Blushing Bridal submission for the June Bra-Makers Supply Challenge – at least not in time for the deadline at the end of June.

But there was nothing to stop me from making a second pair after the deadline. So, I did.Here’s my second pair.

For this pair, I’ve used lace across the front of the panty, and cotton Lycra and lace trim for the rest of the panty.

I also moved the side seam further to the front on this panty.I moved this seam only because I wanted it a little further forward. I could move it forward still, but really, I’m just playing with the seam at this point.

The side looks pretty much the same as the previous pair of panties and so does the back. The front is the only difference between the two – with the lace detail.

Here’s my full Blushing Bridal Part II set:    Happy creating!

June BMS Challenge – Blushing Bridal

June BMS Challelnge– Blushing Bridal – June is the time for brides and we share the joy of an upcoming wedding of one of our own staff members by challenging you (and us) to create garment suitable for a wedding trousseau. You can make any garment suitable for a bride’s trousseau or honeymoon. Oh, this is going to be so romantic!

This post is combining two things – the June BMS Challenge and a New Ruby pattern for me.

I knew when I took the Fitting Course at the end of April that my bra wasn’t fitting perfectly. In fact, one of the things I learned is I needed a few new adjustments to make my patterns fit.

A couple of these adjustments I knew – the ones for adjusting for an Omega shape. There were a new ones too. The new adjustments weren’t the only changes. My size had changed. I was down half a cup size, down a band size, and down a wire size. I was so glad to take the Fitting Course. On top of learning all the wonderful things I learned, I got measured again and I needed that.

So, between needing a new bra myself, and the challenge, it seemed a perfect time to make a new bra with all the changes, and make it fit the challenge.

My New Blushing Ruby

This turned out to be very pretty. Of course, there are still a few changes I want to make, but this fits so well. All the adjustments I learned are making this my best fitting bra yet.

A couple of the changes I made.

You already know I made a half a cup size smaller, and band size smaller, and a wire size smaller. I also made all my usual adjustments for being an Omega shape – small darts along all the bottom cup seams, smaller frame size than cup size. I also lowered my bridge, and raised the bottom of the bridge, and widened the bottom of the bridge too. And added the Gothic arch.

I’ve moved the strap placement over on this pattern. One of the things I love about the Ruby pattern is I don’t have to pull so very much all along the underarm with my elastic. Just a little pulling and it fits well.  Here’s the side view. Look how nicely the cup is fitting into the frame. Oh, I’ve said it before, and I’ll say it again. I’ll never get tired of seeing how nicely the cups fit in after taking that class with Jeanette.

Something you can’t see here is there are two more adjustments right there in that photo – both to help with the wire fitting more comfortably.

Lastly, here’s the back, and one more adjustment.    The final adjustment I made was to move the straps in on the back.

Panties to Match

Continuing on the Blushing pink theme, I made some cotton Lycra panties to match my new Blushing Ruby bra.Seeing as the bra has white in the lace, I thought white lace trim would be perfect for these panties.These are my self-drafted Hipster panties, and you might notice the side seam is forward a little. That’s just so all my side seams aren’t hitting all at the same place.    And the back.

Here’s my new Blushing Ruby and panty set.It’s been a long time since I was a bride, but I love my new blushing bridal set.

Happy creating!

May BMS Challenge – Spots and Stripes

The May Bra-Makers Supply Challenge is Spots and Stripes.

Here’s a challenge that will have you seeing spots before your eyes. Actually, you’ll be seeing spots, dots, lines and stripes. Let’s challenge our thinking about these pattern basics and create garments with dots and stripes. That’s any kind of dot or any kind of stripes, in any kind of intimate apparel. The trick is to use them together in the same garment.

My Entry

For my entry this month, I had a hard time deciding between the two possible projects – panties or tankini.

However, looking ahead just a little in the BMS Challenges for the year helped me make my decision. The July Challenge is Swimwear. Hmm. I just made a swimsuit. If I make a swimsuit now, and again in July for the Challenge, well, I don’t need that many swimsuits. I decided to save my tankini make for July.

Panties it is.

Front Feature Panties

Here is my entry using my own drafted panty pattern.I think these are adorable! In fact, I like them so much, I went on to cut out five more variations! I’ll show you those after I show you the side and back view of this first pair.

Here’s the side view. Oh, I love polka dots. Polka dots and lace take the love to a whole new level.And the back view.

Variations on a Theme

I really did think these were adorable, so made a second pair but reversed the prints. I changed the lace trim I used too. This is my favorite lace trim, and sadly, I can’t find it anymore. The vendor I purchased this from is no longer selling it.I used up the last of the stripes, and that inspired me to make a pair in the last of the black with white polka dots. These are so cute.I have two more pair of white with black polka dot panties all cut out, but somehow with a whole rack of thread, I didn’t have any white thread.

Those last two will have to wait.

Happy creating!

A Little Designing

I was planning my entry for the May Bra-Makers Supply Challenge and thought I’d share my process with you.

 I do have to say, I love polka dots, but stripes haven’t always thrilled me. Remember the apron pattern I was looking at recently? Stripes don’t always play nicely with my hips. However, I set a goal to do all the Challenges this year. So, I sat down and thought of a few ideas.

Panty Idea

For the panty, I knew the perfect pattern right away. The Rad Patterns’ Panel Undies. These are so cute. I have this pattern, but I also made my own self-drafted panty with similar styling. For my submission, I used my pattern.

So I took my inspiration from the Rad Panel Undies and had some fun drawing and coloring a couple of options for what I could sew for the challenge.

I have some adorable black with white polka dot cotton Lycra, and white with black polka dot too. I have some black/gray stripped cotton Lycra I could pair with both of these CLs.

This is one option I’m thinking about, but I did have those polka dot materials planned for a color block halla Agnes top for summer. Hmm, I might have to see if I’ll have enough left over before I go with this idea.

I put these designs aside and thought of another idea.

Tankini Idea

 I had planned to make a Tankini from my swimsuit pattern, and I had already purchased some great swim material from Libelle Sewing last year.Aren’t these great? I hadn’t decided if I wanted the black on the bottom, on the top, or color blocked, but I knew they’d be adorable together.

Then I was thinking about the challenge, and wondering how I could incorporate these polka dots into my Challenge entry.

 I took a look at Libelle Sewing again to see if they had any striped material, and they had this Ombre swim print.Here they are side by side.

Well, I didn’t love the stripes and polka dots together, so I tried coloring a few ideas.

Here’s was my first try.

That was okay, but I wanted the stripes and dots on the same part of the pattern. I kept coloring. I like this one a lot better.

I had one more variation to try.As I was drawing this, I realized exactly what it was I didn’t love about the first two combinations – I wanted more continuity between the top and bottom pieces. So Rad Patterns’ Panel Undies inspiration struck again. I could do an ombre panel on the tankini bottoms as well.

Next week I’ll show you my make for May.

Happy creating!

Pin-Up Girls Newest Addition

The Pin-Up Girls line of patterns has a new member. Meet the Cheryl Panty pattern.

At first glance, Cheryl may not seem so very different from the Pin-up Girls Panty Basics Pattern.

But they are different.

The new Cheryl is a combination of the two basic styles of panties; the brief and the boy shorts. It is the ideal panty for everyday wear. Cheryl has the look of the brief in the front however the back features a center back seam.

The Panty Pattern includes 4 views, with two height options (waist or hipster), and two leg options (thigh cut and high cut).

The feature I like best is part of all four style options – there are no side seams on these panties. There is one back seam and that’s it. It gives a nice smooth line to the panties.

Here’s my Cheryl from the side.The panty having no side seams is a really nice feature.

Another feature I really like is the lace back that wraps around to the front.

Seeing as I was testing the pattern, I made a basic Hipster panty with no alterations to the pattern – to see how it would fit. The measuring for these panties is a little different from other patterns, so I wasn’t sure how they would fit. This pattern is based on your hip measurement alone.

The good news is they fit and I was pleasantly surprised.

Here’s the front of my Cheryl panty.And here is the back.The seam isn’t that noticeable to look at. Using the lace option, it would become a feature too. And I’ve made panties before with a back seam and I didn’t notice the seam when wearing them either.

This is a nice change from the basic pattern. If you’ve been looking for a seamless panty pattern, here it is – at least no side seams.

The panty is available now at Bra-Makers Supply.

Happy creating!

Dora V-Cut Back Lace Panties

I have a short and sweet post for you today.

Have you seen the new pattern by Full Cups Lingerie? It’s the Dora V-Cut Back Lace Panty. They are adorable! Here are a couple of photos from Full Cups Lingeries Instagram page.

Here’s the line drawing of the front.

Just adorable. But wait. Look at the back of these panties!The lace wraps around from the back to the front, but there’s also that adorable little ring holding the back together.

These are lovely.

I was asked to test this pattern, and found them easier to sew together than I first thought it would be. I used some cream cotton Lycra from Black Rabbit Fabrics, and a very pretty lace I had in my stash from Libelle Sewing.Oh, I like that lace wrapping around to the front. It’s a very pretty detail.

Here are the panties from the side. Here’s where you start to get a little more of that lace detail showing itself.I do like this lace and cotton combination together.

Now for the real feature of these panties, here’s the back view.   They are such a lovely panty, and I had fun making them.

The pattern is available on Etsy in Full Cups Lingerie‘s shop.

Happy creating!

B,Wear Mystery Box

I pretty much love all things bra-making. I love patterns, laces and materials, and even elastics. So, when I first read about B,Wear’s Mystery Box subscription, I knew I wanted to try it. However, finances don’t always let me do what I want, when I want. Sometimes I have to wait. Sometimes it just doesn’t happen.

Fortunately for me, Christmas came and I got a subscription as a gift.

The Mystery Box

I’m pretty sure I’m not alone in getting excited when bra-making supplies arrive in the mail. Whether it’s that one item I need to complete a project, or a brand new kit. I get excited.

Well, this box really just adds to that excitement! Look at that label. I bet it’s even intriguing for the mail carriers who are delivering it. Just what is in that Mystery Box?   What fun! I couldn’t wait to open it.

The inside was just as fun as the outside.Once the outer box is opened, it’s still a mystery as it’s wrapped up in tissue paper and sealed with a foil heart. I loved this. It’s a lovely presentation. And it only got better for me.

What’s Inside?

What was inside was a treat for me. The January Mystery Box was all about making panties.Doesn’t that all look pretty? Let’s unpack and take a closer look at just what was in the box.And if you’re not sure what one of the items is exactly, there’s a note outlining everything.This is perfect for me. I love cotton panties! I can’t wait to sew this up. But do you see the bottom of the note? There’s one more item included in the Mystery Box – a new pattern.

Tippi Classic Window Brief

  The Tippi pattern is designed by Laurie Van Jonsson – the same person who released How to Grade a Bra and Brief this past year.I haven’t tried any of her patterns yet, so this will be a fun new experience for me. The Tippi is described on her website as:

‘This brief sits low and has all the detail in the back.’

That does sound interesting. However, before I sew this pattern, and have fun with this Mystery Box, I’ll be back to sewing my Fitting Bras. I’m on my fourth bras for the month, so far.

Happy creating!

A Few Leftovers

I still have a few projects left over from 2018 I want to get done. I decided these would be the first sewing projects I finished in 2019. As well, I have a free House Morrighan pattern hack for you this week. See the bottom of this post.

Clover Briefs

There was a pair of House Morrighan Clover Briefs that were mostly sewn sitting on my cutting table. They were waiting for the bands to be put on the legs. That was it. But Christmas came, and visiting, and New Year’s, and we went to the mountains. There were a lot of reasons I wasn’t sewing. Those Clover Briefs waited for me though.These are adorable too. I made them in the reverse of the color block I made my first ones.Although the bands for the waist and legs are easy, and do look nice, I still  prefer lace trim for finishing my panties.

Here they are from the side. And from the back. Well, I can say, I definitely don’t like how the bands are flipping up in the photos. Good thing they don’t do that when they’re on me. I’ve got more to fill them out than my display.

Another Clover Boybrief for Em

   Em loved this pattern too. So much so, she requested another pair. Instead of the Clover briefs, which I prefer, she asked for the boy-leg opening.

She also requested a color combo, and for them to be finished with bands. Em prefers bands to lace trim.

Here are Em’s Clovers in pink and ivory.

Oh, these are darling! When I was sewing them together, I wasn’t sure how I felt about the two colors, but seeing them on the display, they look great!

Here’s the side view.  And the back view.  Oh, they are sweet. And it’s nice to see panties that fit my display perfectly.

Just so you can see all the ways I’ve made the Clover boy briefs, here’s a collage of what I’ve done with the pattern.

Free Pattern Hack

House Morrighan has released a free pattern hack only for members of their House Morrighan Makers Facebook group. This pattern is for a nursing hack for the Poppy, Dahlia, or Abbie patterns. You will need one of those patterns first to use this hack. Just go to Facebook and join the group for the free pattern. It’s in the files.

Happy creating!

Bra-Makers Challenge – August

I made a matching set for my August Challenge –  Lacy Days of Summer! “Use 2 laces to create a bra, bralette, panties or corsets. Two is better than one!”

I’ve used my drafted panty pattern and two laces.These are my Hipster draft. I made these from black cotton Lycra, and two laces. The multi-colored lace is very light-weight, so that is backed with CL, but the pink/mauve lace is a firmer lace and is on its own with no backing. Because it’s firmer, I didn’t add elastic to the waist at the front either.

In fact, I think these qualify for three laces! There’s a narrow black lace trim at the legs and waist. That’s three laces in one panty!

Here’s the back of the panty.I fully meant to finish the back of the panty the same as the front, with both laces. However, I sewed these up on my trip to the mountains and didn’t remember to either: a) cut the lace out and pack it, or b) pack it. So these will only have the one lace on the back.

A Lacy Poppy

I combined testing the Poppy Bralette with the August Challenge to make myself a sweet lacy set.

Here’s my Poppy. The bralette can’t be part of my challenge entry because it’s not a Pin-up Girls pattern, and I didn’t draft it from BMS information, but I still wanted to make myself a set.For this Poppy, I made a smaller band and larger cup size than the first two. This one fits me perfectly.

I also kept the scalloped edge of the lace on this.  Poppy is an easy sew, with generous sizing. And it’s really comfortable and although this one is stretch lace and power mesh, it’s still supportive.

My Lacy Set

  Here’s my self-drafted panty and my Poppy set.I really wondered how I would like two laces together, but I really like this. And only having one lace on the back of the panty? Well seeing it from the back with the bralette, it works much better this way!

Happy creating!

Panache Inspired

Inspiration

Recently I read an article by Who What Wear saying Boyshorts are going out of style. That won’t be terrible for me. Boyshorts aren’t the most flattering on me. I think they’re adorable, but they just don’t suit a curvy shape as well as they suit a less curvy shape. That’s probably why they’re called boyshorts.

The article showed a few up-coming styles and there was one I really liked.

The Panache Lingerie Quinn High Waist Brief: Oh! These are lovely.

I started looking for patterns that had similarities. Here’s what I found.

First, Daydream Patterns Nora Knickers.

This pattern has lace attached at the leg. It’s great because it attaches the lace the same way for the back. The front is different, but could probably easily be adapted to be the same as the Panache panties.

Another pattern I thought of is the Ohhh Lulu’s Betty High Waist Panties.  It’s quite a similar shape, and I’ve always adored the look of these panties..

Here are the three panties together.The Panache is in-between these two patterns, but is a bit closer in shape to the Betty. If you haven’t taken Beverly Johnson’s panty class on Craftsy and aren’t comfortable drafting your own pattern, either of these patterns would get you close.

My Master Pattern

I have taken Beverly’s class, so decided I would make my own Panache-inspired panty. I pulled out the master pattern I made using the Craftsy class Sewing Panties: Construction & Fit. I usually make Hipsters with my pattern, even though on my dress form they look like briefs.Although these come up to the form’s waist, they’re hipsters on me.

Pattern Adjustments

The first thing I did was add back the 2-inches I’d removed from the pattern’s waist height when I made them into Hipsters. The pattern is again a brief. Loving hipsters as I do, I decided to go with a brief rather than a high-waisted panty. We’ll see how much I love briefs before I try high-waisted.

Next, I added a seam to the front/side. I’m keeping the side seam too, but going to move it back to the side. My ‘side’ seam is moved forward so it doesn’t show. The purple line shows where the side seam would normally sit.

You can see in the photo above how the seam is moved to the front of the panty and not sitting right at the side.

The Panache panty has a back seam as well, but I’m not adding that. The only time I add a back seam is if I’m short on material. Otherwise, I prefer no seam for the back.

Next, I decided how much lace I wanted, and then added the lace detail to the pattern.

Here’s my pattern ready to get cut out.  Lastly, I added seam allowances to those new seams, and traced off my new pattern pieces.

I’m all ready to make my own Panache Inspired briefs.

Happy creating!