A Pin-Up Girls Shelley with a Sewy Rebecca Twist

April 3, 2015December 27, 2017 ~ Michelle ~ 6 Comments

I’m still trying to decide which bra pattern I like better. It’s a very close match between Beverly Johnson’s Pin-Up Girls (PUG) Shelley pattern and Sewy’s Rebecca pattern. They’re quite similar – both feature a lace upper cup and a power bar. Shelley has a split lower cup as well where the Rebecca doesn’t.

Here’s the Sewy Rebecca photo from their web site. I’ve been to their site a number of times and am getting used to where things are even though I don’t speak any German. However, if you open their site in Google Translate, everything is much easier. You just can’t place an order on their site using Google Translate.

krprebecca_rosakopie_z1

Oh, that’s a lovely bra!

And here’s Beverly’s Shelley pattern from the Bra-Makers Supply web site.

Four%20piece%20cup%20Shelley%20Bra

Absolutely gorgeous!

One difference I’ve noticed is when the patterns are both flat, the upper cup along the cross cup seam is straighter on the Sewy Rebecca than the PUG Shelley. The Rebecca is on the bottom, Shelley is on top. See how much more curved the Shelley is? But they are both the exact same length.

100_2964

According to Beverly in the Bra-Makers Manuals, a straighter bottom edge on the upper cup will give more lift. Who doesn’t want more lift? However, to be honest, when I’m wearing the Rebecca, I don’t notice any difference.

So, which bra wins out? I’m still undecided. I do know one aspect of the Rebecca that does win hands down – the enclosed seams on the inside of the bra! I love that! It does take a fair amount of work, but is so worth it.

Due to my immense fondness for those enclosed seams, I Sewy-fied my Shelley this week. I added lining and followed the instructions for sewing the Rebecca to completely enclose my seams. I even upped it a bit and added a lower cup lining, so the whole inside of the cup is now lined with no seams showing. The only fault with the inside is I forgot to change thread colors and there is beige thread from top-stitching very evident on my black lining. I noticed it too late to change it.

Here’s a photo of the bra’s inside.

100_2962

Oh, those enclosed seams. That is so pretty and, I think, more professional. On one Prima Donna bra that I owned, wore, and then took apart, all the seams were enclosed. I’m still trying to figure out how they did the strap and made it enclosed too. But they did.

100_2971

Here’s my Shelley from the outside. I think I’ve figure out the best way to stuff the bras for Catherine. I use the cut and sew foam cups I made that are the same size and shape as the bra cups, AND the pre-shaped foam cups, which are sturdier. Finally, a mostly wrinkle free photo.

This is a fabric kit from Merckwaerdigh‘s Etsy shop. I really do love her laces. I’ve backed everything up here with sheer cup lining, Duoplex, Power Net, and elastics from Bra-Makers Supply.

100_2972

Here’s my Shelley from the side. Again, I added another touch from the Sewy Rebecca and used lace on the power bar. The lace here looks so different from the same lace with the black sheer lining behind it on the upper cup.

100_2961

A very basic back.

For alterations on this bra, I made a smaller cradle, narrowed and lowered the bridge, adjusted for a flat spot on the bridge and cups, made the underarm area smaller, I shortened the wire line seam (with gathers again), added linings to the cup, and used a flexible wire.

Happy creating!

A Beige Shelley Set

February 14, 2015December 27, 2017 ~ Michelle

I’m pretty sure I’ve used that title before, and will likely use it again. I really like my basics and I like the Shelley pattern by Bra-Makers Supply. Here’s my most recent Shelley:

100_2808

I need to make some proper-fitting foam inserts for photos. I don’t like all the wrinkles! However, as a bra, this is my best yet. I love it. It’s kind of funny because I saw this lace on the Bra-Makers Supply (BMS) web site, and ordered it right away. When I got it, I was putting it with my other laces, and lo and behold, there was another order I’d placed before for the same lace. Yup. I know I like it when I do that. It wasn’t the first time, and I doubt it’ll be the last. I did that with a Merckwaerdigh lace as well. It’s good to know I really like it.

For this Shelley, I did what I did for the last couple of bras I made. Rather than making alterations to the cup to make the larger cup fit into the smaller cradle (Omega shape), I went in-between the sizes. The cup corresponds to a 42 wire, the cradle I need is a 38. I used the 40 cradle. The wire still fits. In fact, BMS say with their patterns you can go up or down a wire size if you need. That makes it perfect for me. The fewer alterations, the better because one alteration leads to another and another.

I thinned the area under the cup even though I used the larger elastic. You can see that here:

100_2813

Beverly, The Fairy Bra Mother, did a very informative blog on how to do this and I’ve been doing it since. You can read her wonderful instructions here.

I also lowered the bridge, adjusted for a flat spot I have and added a vertical dart to the pattern to take out a little excess under the arm.

It’s so wonderful to have learned to do this, and from now on I can have perfectly fitting bras. That is tremendous!

Another sparkly idea that came from Beverly was to add some Swarovski crystals to the bra. Pure brilliance. So, I added a little bling to the bra too. This bra has bows and crystals.

100_2811

I attached these sparkling little delights on the bridge just above a ‘floating’ piece of lace. I say it’s floating because I only sewed the sides of it into the seams of the cup and cradle. I used the Swarovski Hotfix Crystal Tool to attach the crystals and love the result. The only change I’d make here is one that will make it a bit easier for me – attach the crystals before inserting the under wires. However, as much as the tool seemed to want to wobble a bit, the end result looks nice and straight.

The back is quite basic.

100_2812

There is a small pucker where the hooks and eyes meet the band, but it’s not the very large wrinkle showing in the photo. That was just me not catching that the band wasn’t on Catherine (my dress form) perfectly straight. I was fighting a cold and forgot to check to see if the band fit properly into the hooks and eyes. I think there’s a 1/16″ little tuck there because I didn’t want any edges sticking out.

Now, for matching panties.

You’d never have known it by following my blog, but I do love matching bra and panty sets. For a long time I was on a quest to find cotton because I love my cotton panties. Once I found my source at BMS, I was working on getting my bra fit down. All the materials for my bras and panties come from BMS except the elastic lace I used on the waist bands – that came from Frog Feathers on Etsy.

Here’s the first pair of panties I did:

100_2818

I love these. Nice soft cotton and matching pretty lace. Who could ask for more? I used my favorite Kwik Sew 2286 pattern and altered it. I did go up a size because the cotton just didn’t have the same stretch as some other knits I’d used in the past. The alteration I made was a simple one. Rather than cutting the front on the fold, I traced the whole front out and then cut off the one side of the front. I added a seam allowance to both sides creating two new pattern parts.

I did run into a bit of a snag not having thought it all through enough. When I was adding the lace to the waist band, I realized I didn’t want to cut off the scalloped part at the top of the lace. So I just ended the elastic lace where the other lace started. Next time I will add the elastic lace to the band before sewing these two parts together.

100_2820

Having that little blip happen helped me with my second set of panties though. Here’s my second pair:

100_2817

Yup. I love these too. It’s the same base pattern, but on this one I traced the front out and laid my lace over it. I wanted the scalloped edge at the top. So with the lace on top of the pattern, I drew a line where the lace ended. Then I traced that part again and added a seam allowance. For this set, I added the back waist elastic first. That wasn’t going to work for the font though. For the front I added a bit of left over upper band elastic. It’s hidden behind the top of the scallops.

100_2821

Here it is from the inside. I didn’t want to leave the front without any elastic, even though the lace is a stretch lace.

100_2819

Here they are, my two new matching panties.

Happy creating!

My First Watson

January 5, 2015December 27, 2017 ~ Michelle

The Watson bra pattern from Cloth Habit is showing up all over the place on blogs. And it is an adorable pattern. I also seem to have an addiction to bras and bra patterns, so I had to try it. I also think Amy (of Cloth Habit) is wonderful. I admire her sewing, and participated in her bra sew along two years ago (can it really be two years ago already?). So when Amy said she was releasing a pattern, I wanted to try it.

The Watson bra pattern isn’t something I’d tend to think about for me. I need support, and this isn’t a support bra. However, it was too adorable for me not to try, and I do wear leisure bras around the home from time to time. The other aspect that was making me hesitant was the material used for the Watson. I usually use duoplex and power net. When I do use Lycra, it over those other very supportive materials.

An interesting aside to this is last year I’d read about a French lingerie company and how they didn’t make structured bras, only soft cupped bras. Their philosophy was a woman’s natural shape was the most attractive shape. I dismissed it at the time thinking that definitely wasn’t for me, but I notice more and more soft cupped bras are appearing in both RTW and patterns. Amy may be right on trend with this.

Here’s my Watson:

100_2764

I really love this. but it’s not perfect. This was one of those projects where I had to fight over ever step.

I chose some fabric I had left over from a Merckwaerdigh kit I bought a few years ago. I made a bra from this too, but it just seemed too much of something. I don’t know if it was too much pink, or what, but I didn’t wear it. You can see it here. The Watson in this material? I love it.

100_2765

Here’s the side view. I put my oft-used foam cups in to fill the bra out. I really do love this material for the Watson.

100_2766

And the back view.

It really is an adorable bra. I do think I’ll try the longline version next.

There’s a little fabric left after making this, and a fair amount of the bright pink lace. I’m thinking of making Merckwaerdigh’s E-SH20 panties, View A.

merck
100_2767

I think that will make a really cute set.

Do any of you follow Erin from The Sewing and Life Adventures of Emerald Erin? Erin has set a sewing challenge for herself – a bra a week! She said for a year, but then amended that the first three month of 2015. She is also open to having others bra makers send their photos to her and she’ll post them along with her own. That just sounds fun! You can check out her blog for all the information, and here’s the email to send your own bras to her: bra.a.week@gmail.com

One last comment; I had a phone call from my Mum. She wants another cardigan. She saw something on the Shopping Channel that looked the same, but cost $150. So now she wants one in black. She also wants a size bigger, which I question, but I’ll make it for her. I was planning another McCalls 6844 for me, so I guess two more are on my sewing list.

Happy creating!

Some Matchy Matchy

December 9, 2014December 27, 2017 ~ Michelle

I do like matchy matchy. Maybe it’s an indicator of my age, but I do like things to match. So, now I have my first (two) great fitting bras, it was time to make something to match.

I couldn’t find any ivory cotton, but did stock up on black, red, beige and pink. So, going forward I’ll have a nice choice of basics from which to choose. My most recent Shelley bra was mostly black, but had some red and ivory in it as well. So I chose red and black for my panties.

100_2694

Here’s my first pair. It’s a modified Kwik Sew 2286, which is basically a hipster. I copied the lace inset from Kwik Sew 2908, but I prefer how the 2286 sews together – no seams showing on the inside. The crotch seams are hidden between two layers of material and then when the lace is sewn on – you don’t see an exposed seam. The 2908 has the front and crotch as one piece, and then the back is sewn to that. It looks similar on the outside, but on the inside you can see the seam very clearly. In the past, I’ve made 2908 and modified it to do the seams the same as the 2286.

100_2692

And the set pinned on Catherine. They look long, more like a high cut here, but I’ve made them before and they are a hipster. My only disappointment is I’m not in love with this as a set. The lace is the same on the panty as the bra, but it doesn’t pull together quite as much as I’d wanted. I don’t think there is enough red in the bra to pull it off. However, it’ll still be a second choice option for me.

100_2696

Here’s the second pair I made. I like this one a lot better. I think it pulls together with the bra without any problem.

100_2695

Here it is pinned onto Catherine. That looks like a set. That’s much better. I really am happy with this set. This will be my first choice to wear.

100_2697

Here are both panties with my bra. It’s very fun to have my first set. The materials are from both Bra Makers Supply, and Merckwaerdigh‘s Etsy store. The panties are mostly cotton from BMS with that little accent of lace/Lycra from Merckwaerdigh’s.

Next I’m going to have to play with my pattern to make an asymmetrical pair – and I think I’ll go with the black & Lycra for that one.

Happy creating!

Fits Like A Dream

December 1, 2014December 27, 2017 ~ Michelle

My newest bra fits like a dream, but she isn’t peaches and cream.

For the better part of the last two years I’ve only worn my own bras. I did purchase a couple of bras too, but to be honest, the ones I made fit better – and they weren’t fitting perfectly. Because I was so used to wearing what I’d made, I thought I’d still wear my not-perfectly-fitting bras, but oh no. Once I had one that fit so well, I found the others just weren’t as comfortable. I have a list of things to sew, but one bra just wasn’t enough. So sewing another bra went to the top of my sewing list.

fav

Here’s my latest (and perfectly fitting) Pin Up Girls Shelley. And she fits like a dream.

I love that little pop of color on the power bar and bridge. That’s just fun. And I’m all about lace. So this bra is bringing together lace and a bit of fun and I’m thrilled.

100_2686

Here’s a better view of the power bar. Oh, I love that. This is such a beautiful pattern. There are so many fun things to do with it. Although the power bar looks like Lycra, it has the support of duoplex under it. I did the same on the bridge. The Lycra and lace are from an older fabric set I bought from Merckwaerdigh‘s store a few years ago. Everything else is from Bra Makers Supply.

sewy-rebecca-left-side-view

Here you can see the Sewy Rebecca I’d done with this material. You can also see I made the wrong size. I still have this bra in the bra drawer – it’s too pretty to throw away or cut up. Back to the material, I don’t have a lot left, so I got creative in the placement of what I did use on the bra. I wanted to save some for panties. Yup, now that I have my bra fit down, I’m going to start making matching bra and panty sets.

100_2688

And the back of my bra. I did the 3 x 3 hook and eye closure again. I’m getting better at getting it done up and undone, and it really does make it more comfortable. Who knew?

100_2689

Here’s part of my stash for panties. That’s some gorgeous cotton/spandex from Bra Makers Supply, and my bit of Lycra left over from the kit from Merckwaerdigh, and some black lace for trim. I also found some pictures online for inspiration. I’m thinking of changing up my panties from the basic pattern I have now. I really love things that are asymmetrical, and love that I found some fun panties with just that look.

One of the best aspects of this journey I’ve been on with trying to find the perfect fit for my bras is the freedom I now feel in altering patterns. I used to feel they were somehow beyond my grasp and I wouldn’t think of altering them. I have no such fear now!

100_2690

And lastly, I’m trying to decide what color bows I want on my new bra. I’m leaning towards the red, or maybe red and black together …

I still have some fitting issues to plan for when starting out, but I did the same thing on this bra – I went up a cradle size from my wire size. This takes care of most of my cup alterations as it’s only one size different than the cup size I’m using. Is that clear?

Let me explain that a bit more. The Omega shape needs a larger cup size than wire. Let’s say I need a 38 wire, but my cup corresponds to a 42 wire. I’m meeting the two half way in between. By using the 40 cradle, the 38 wire will still fit, and so will the 42 cup. This one change eliminated a lot of alterations.

However, I still made a few. I thinned the bra under the cup little more this time, so I ended up trimming my elastic under the channeling. I lowered the bridge 1/2″ again, and on this bra I adjusted for a flat spot I have. And I put in a vertical dart in the underarm area. I don’t think there are any other alterations I would even want to make on this bra.

Ah… a perfectly fitting bra feels so good.

Happy creating!

A Small Parade of Panties

September 16, 2014December 27, 2017 ~ Michelle ~ 4 Comments

I’ve been asked why I don’t make panties. The funny thing about that is ever so many years ago when I was first pregnant, I hated the maternity panties that were available, so I made all my own panties, as well as some of my own maternity clothes. Then I don’t know what happened to making panties. I just stopped.

The question stayed with me. I have to admit, one reason I hadn’t made panties yet is because I love my cotton panties. But I also love lace on them and I can’t always find that. As well, I’d looked around for cotton to make panties and just wasn’t sure about so many sources, so I hadn’t ordered any. A quick call to Bra Makers Supply and I found out their Cotton Spandex Double knit is just what I’m wanting. It’s a blend of 94% cotton, 6% Lycra. I’m thinking it will be perfect. You can find it here. It also comes in the same colors as their Power net and Duoplex – I do like things to be matchy matchy.

I have a few panty patterns in my collection, so decided I’d try a couple of them to see which ones I preferred.

Here are the patterns I tried.

100_2414

The first one I tried is a throwback – high cut panties. I haven’t worn anything like this for years, but loved them way back in the day.

100_2401

I used some knit that was a gift from Naomi. Thank you, Naomi! These are a basic black knit with stretch lace elastic trim. The pattern is Kwik Sew 2075, view D. It was funny, when I was making these I would just start to do something, and then think, oh it’s been a while I better read the instructions. I’d read them, think yup, and keep going. It was amazing how much came back to me so quickly.

This high cut style is very comfortable on, but as I say, it’s been years since I’ve worn anything high cut. I think I now prefer something more of a hipster. So the next pattern I made was more along that style.

black grey

I really like these. These are very comfortable and almost the same as a favorite La Vie En Rose pair I’d saved. I loved the La Vie En Rose ones so much I cloned the pattern. However, this is almost exactly the same. Only very slight differences, so I went with the pattern. This is Kwik Sew 2286. The pattern is mainly for tops, with one pair of panties thrown in. There is no option for a different view or style for the panties, but I really like these, so don’t know that I’ll look elsewhere. These just might become my TNT basic pattern. But then, there are so many pretty options out there from which to choose.

And the last pair I made is a friend’s TNT pattern. It’s similar to the pattern above, but this one is Kwik Sew 2908.

100_2413

These are the same black material I used on the first pair I made, but these have a sweet pink trim on them to match the black Fantasie clone I made with black and pink lace. I did change this pattern slightly. For the ‘gusset’ (I don’t like crotch, just as I’ve read some don’t like panties. And I do know it’s not really a gusset), the pattern has the gusset attached at the front with a single seam at the back. I changed this so the gusset has two seams – front and back – and that way I could enclose the seams completely. I’ll show that in another posting.

And I still have a few other patterns I’ve collected I want to try. I’m thinking of making one of Merckwaerdigh’s patterns next. I have E-SH20 and E-SHL 30 of hers. I also have one of Stretch & Sew’s patterns. Not pictured here is Ezi-Sew Ladies’ Knickers pattern and two more Kwik Sew patterns, 2100 and 2868. Seriously, I have a pattern addiction! But it’s way more fun than the OPI nail polish addiction I had. (smile)

100_2415

One last panty resource I have is The Make & Fit Panties book from Bra Makers Supply. So now I’ve practiced a bit again, and I’ve found my source for cotton, I see more matching sets ahead.

Happy creating!

A Marathon of Muslins

September 9, 2014December 27, 2017 ~ Michelle ~ 4 Comments

I was so excited to finally have a bra that fit with the bridge going all the way back that I made a whole bunch of bra muslins to try on over that bra. I went through almost all of my patterns – there are a few that I likely won’t ever make – and I sewed up muslins for test fittings.

This first bra muslin I made was a brand new pattern just released. It was Orange Lingerie’s new pattern, the Marlborough pattern.

Marlborough

You can see here the fit looks like it will be really close and I won’t have to do very much in the way of alterations. The Marlborough doesn’t actually list my size in the size range, but I know all about finding the right size by the wire size. So using my ever-so-used BMM chart, I found the correct cup size to fit into my band.

Great! I marked the muslin where I’d need to reduce it a bit at the bottom where it overlaps the seam allowance on the actual bra, and pinned it to the pattern for when I’m ready to tackle making this bra.

Shelley

Next it was the Pin-Up Girls Shelley pattern. Again, the depth looks good, but it’s not perfect. I marked where the seam lines fell under the muslin, and I marked these right on the muslin. It’s now pinned to the pattern and ready for the alteration stage as well.

After Shelley, I did the Pin-Up Girls classic pattern.

PUG Classic

You can see I also wrote the pattern name and size on the muslin.

After I finished with my Pin-Up Girls, it was time to try a few of Merckwaerdigh’s patterns. This is where I had to do a re-do.

BHST2 B too small

I started with BHST2, but you can see the cup is too small in this size for me. It just won’t meet all those seam lines under it. I quickly traced off the next size up and that one was fine.

BHST2 B

This one gives me all the depth I need, and I’ll alter the pattern to fit my shape. Again, I marked on the muslin what changes I’ll have to make and pinned it to the pattern.

For some reason I didn’t trace of the CUPL-16 pattern I have. I must admit I was running out of steam by this point.

I did trace off my Sewy Rebecca. I wasn’t sure about the size, and the size I chose was actually too big. So my next muslin of this will be smaller.

Sewy R 1

You can see here the cup is clearly too big.

I was really tired after all this, but have a great place to tackle each of these bras now – one at a time.

Happy creating!

One More Fantasie Clone

August 29, 2014December 27, 2017 ~ Michelle

I was so close on that last bra. And at this point, I do have a drawer full of bras I can wear that mostly fit. But I must admit, I am like a dog with a bone when I want to figuring something out – and getting that perfect fit is my objective.

I’d recently read something very encouraging from Annele, the founder of MakeBra said:

“An older lady, who was running her own lingerie business only few years ago, told me that you need at least twenty test fitting sessions before the bra pattern is ready to go.”

You can read about it here. Oh, that was such a relief to read. Then I’m not obsessed, or a terrible sewer. Whew!

Thankfully, at one time I’d bought the same Fantasie bra, but one size bigger. I think it was one size bigger. For example, what would be the size difference between a 34D and a 34DD? The only charts I have are from Bra Makers Supply, and they don’t do the double letters.

Back to the bra. I’d cloned it, and then after wearing it for a little while, gave it to a friend because I found it a bit loose in the upper cup. However, I was thinking this size would be perfect with the firmer Duoplex material. All the materials are from Bra Makers Supply.

100_2410

Here it is. I think it shows the cups are a little fuller than the last bra. And just because the cups are fuller, it doesn’t show here how the bridge is really narrow at the top. The channeling and wires completely overlap at the top of the bridge. And the bridge goes all the way back!

As much as I loved the thin ribbon on the original Fantasie Vivienne, I couldn’t find anything in a beige or tan, only white. So I went with some bows I had for this bra.

100_2424

Here is a picture from the inside to show the wires and channeling overlapping at the top. It’s a bit tricky to sew this. What I do is sew the first channel down completely, and then the second channel is only sew down completely at the top and on the inside seam.

On the outside seam where the channeling pieces are overlapping, I do not sew it completely. There’s only maybe 2 cm opening where it is not sewn on the outside of the channeling. It has to be left open on the outside there so the wire can slide through that lower channeling.

On the top piece of channeling, I sew up to the outer seam line on the lower channeling, and it makes an attractive inverted V-shape in the stitching on the front of the bridge.

100_2431

And here is the back. I reduced this to make it a 2 hooks and eyes set again. This is how the original RTW bra came, so I wanted to do that again. It’s a wonderfully comfortable bra – and the bridge goes all the way back except for a tiny bit at the very top after I’ve been wearing it for a bit. It looks like I’ll be shortening my wires by 1/4″. But at least I’ll still have a full bridge.

Now I have a pattern that really works for me, the next thing I want to do is to take this pattern and use it to figure out what size I’d want to make in all my other patterns – the Sewy Rebecca, and the Pin-Up Girls Shelley and Classic, and the Merckwaerdigh E-BHST2 and E-CUPL 16.

And now I have one more pattern in my collection to try – Norma from Orange Lingerie just released a bra pattern! The Marlborough bra pattern. You can find the pattern at Orange Lingerie’s Etsy shop.

Happy creating!

Kwik Sew 3300

June 29, 2014December 27, 2016 ~ Michelle ~ 5 Comments

This is such a pretty style. Here is my Kwik Sew 3300:

100_2251

I think it looks so pretty with the black and white theme. The lace was a gift, and the floral stretch lace is from a local fabric store. All other material supplies are from Bra Makers Supply.

It’s pretty, but there were a couple of fitting issues. One really wasn’t a biggie. This bra had the straps pinned up about 2 inches here in the picture – so I shortened those.

The bigger fitting issue is the upper part of the cup is loose. I could pinch a quarter-inch out of the upper cup. That shouldn’t be too hard to fix on the pattern, and thankfully it doesn’t show when I wear it. This style actually fits similarly to how a foam cup bra fits.

100_2256

You can see here where I pinned the cup.

The steps I took beforehand really helped me to get the cup to fit properly. Here’s what I did for this bra (and some of this is from past posts, but I’m putting it all together here):

The first thing I did was sew up a muslin for the cups. I did this twice. After looking at the pattern pieces, and picking the one I thought was closest to my size, I sewed up my first muslin. I used some scrap cotton I had left over from a skirt muslin I’d made. On this first one I could see how much I would need to adjust the pattern along the wire line. Remember, I my wear one size bra for the cups, but my wire size does not match that – it’s quite a bit smaller. So that was my first adjustment.

After I altered the pattern I sewed up another cup muslin. Again, I used some left over cotton, but this time it was from one of my moulages. This second one I pinned over an existing well-fitting bra. It was a pretty good fit at this point. But still needed a bit of adjustment. On this second muslin I drew where the seam lines fell underneath it. Again, dealing with an Omega shape means most patterns don’t fit the way they are.

100_2175

At this point I was pretty sure I had the right size and shape for me. And I was really close.

This bra has a vertical seam, so no upper and lower cup, but instead and inside and outside cup. I was using lace for both the inside and outside cups, so I lined them both with sheer cup lining. That made both cups completely non-stretch to give it the support it needed. I’ve done this before on all lace bras, and it works great. I usually don’t use Lycra because I don’t find it offers the support needed, but using this sheer cup lining would be a great option for under Lycra too.

At this point I was feeling quite confident that this bra was going to fit without any issues. You see, most of my issues have been the bridge and the adjustments I needed for the Omega shape. I haven’t run into this looseness before.

I didn’t use the band that came with the pattern. I used the one I know fits wells. I now have a custom bridge that is working great for me and I wasn’t going to mess with that. As well, I drafted the cradle on my band to fit a Vertical wire and a custom bridge. After all the work to get the band to fit so well, there was no way I was going to try another band! All I was really wanted was to insert the 3300 cups into my band for a different look.

Even though this bra pattern still needs some tweaking, the steps I took ahead of time really were worth all the effort. And if you have challenges with fitting, I really recommend this method of fitting the bra cups. A shout out to Sigrid for sharing this. And after much searching, I realized it was not in her blog, but on Pattern Review. She explained this when she reviewed Merckwaerdigh’s BHST2 pattern. Really a great tip!

Happy Creating!

Seemed to Take Forever!

April 15, 2014December 27, 2017 ~ Michelle

A while back – it was January, I think – I mentioned I’d ordered a booklet on altering bodices. It was one of those things that seemed to be taking a long time getting to me, so I went online and looked up the tracking number to see when I had ordered it. It had been about a month at this point. I thought it should have arrived by now.

What I found surprised me. That little packet had made it all the way from Australia to my little town in Alberta, Canada, but didn’t make it to me! I could hardly believe the label fell off while it was on its way to being delivered to my door. It made it to the post office, was out for delivery and then the next thing on the detail list from the tracking number was it had been sent to the Undeliverable Mail Office. Maybe I should call that bag of bras that don’t fit The Undeliverable Bra Bag.

What a run around! I spoke to one woman in the post office and she took all the information I had like my name, address, the tracking number, the sender’s name and address too, and at the end of the call said for me to stay home the next day – the parcel would be delivered then. Well, that day came and went, and I waited, but no one came to my door. I called the post office again.

The next person I spoke to was most unhelpful. She could not give a straight answer no matter what I asked her. I might get the parcel in a month, but there was no guarantee. That, definitely, without a doubt or hesitation, was a very frustrating phone call, and nothing resulted from it.

I think a weekend came at this point and I had to wait a few days before I could call again. The person I spoke with took all my information (again), and this time was very helpful. She assured me I had given enough information, and with the tracking information, was the person who was supposed to receive that package. Whew. I was told it would be on its way to me.

During all of this, I was in contact with the sender and author of the booklet. She was as anxious as I was for this parcel to be delivered. I’d shared every false-positive start I’d had. We were both in waiting mode at this point.

The next I heard from the post office was a lovely official letter telling me that as the addressee I had no authority to start an investigation as to the whereabouts of this parcel! So, I contacted the post office again, but this time to ask why all the run around. Why was I being asked for information, providing it, being told that was enough, and then being told it wasn’t, later, in a letter. They apologized profusely at this point, and told me what information the sender needed to include to start an investigation from her post office in Australia.

All I can say is, 38 emails and 5 or 6 phone calls, a letter, and three months later, I got my parcel. The envelope it was in was pristine! Not a mark or tear on it; no label either. Somehow, that had gotten lost.

booklet