Just a follow up from last week’s post: I don’t prefer Vertical wires. I wore them for a whole day, then on the second day I took them out. I put in my regular Long wires and am much more comfortable. That just goes to show, some women dealing with the Omega shape will do better with them, others will not. There really are no ‘set’ rules, are there?

So, I had altered my Sewy Rebecca pattern for my needs – smaller lower cup edge to fit into the smaller wire frame I need. But I decided to do a few more alterations. Here’s why:

There are things I do like about the Sewy Rebecca, and there are things I don’t like about the pattern. There are also things I like about the Shelley Full Band pattern, and a couple of things I’d change. So, I decided to see what would happen when I put the two patterns together.

I was joking with Andrea from Satin Bird Designs saying I was creating a monster; she dubbed the new bra the Franken-bra. Thankfully, it turned out very well and much prettier than those monikers sounded too.

Here’s what I did:

1. I really like the upper cup on the Rebecca – it’s just a little straighter across the seam line, so gives a little more lift. So, I used Rebecca as my starting point.

2. However, I like the split lower cup on the Shelley, so I split the lower cup on the Rebecca.

3. I also changed the shape of the Rebecca  power bar to look more like the Shelley – especially at the top where it joins the strap. In the English instructions for the Rebecca only strap elastic is used for the straps whereas the Shelley uses a fabric strap, which is my preference.

4. So I added the fabric strap.

As cute as Franken-bra is, I re-named her Shelley Rebecca. Here she is:

Here’s the front view. I used a non-stretch lace (Floral Lace Fabric) I bought from Bra Makers Supply. I really like this lace fabric.

Here’s their description:

“All-over woven lace with a floral design with virtually no stretch – making it perfect for bra cups. We would recommend stabilizing the fabric for the frame or the straps but it certainly could be used for the entire front of the bra.”

I really like this material. One thing I like about it is the seams virtually disappear into the fabric because of the texture of it. The other is it really is non-stretch, so can be used all over.

Here is the side view. Nice smooth fit into the wires, so I’m very happy. (If you’ve been reading along, please notice my restraint here in what I’m NOT mentioning.) A nice small underarm area, so again happy me! Do you see how those seams blend so well. I had to lighten the photos to get the seams and other details to show at all. Black on black really isn’t the best for photos.

Hmm, straps felt a bit too far apart still. I need to go through my patterns and make a back pattern I’m completely happy and thrilled about.

Again, I used a straight stitch to tack down the eyes, and then this time I also changed my width for the Zigzag to a wider than 2.5 stitch, which is standard for sewing lingerie. Both of these helped it go on nice and neatly.

This is just to show in a little more detail how the seams virtually disappear with this fabric. I was quite impressed with this. It also shows where I put the seam in the lower cup of the Shelley Rebecca.

Here’s where I changed the top part of the power bar. I also changed the direction it faced at the very top by cutting off the top and taping it back on ‘backwards’. I think I preferred it this way as I need the straps in a little more normally.

Well, I have more sewing to do, and a medical ID bracelet to make too.

Oh, and I used the foam cups to fill the bra cups this time. I’m still undecided which looks better.

Happy creating!